E3Z E3Z
4
M8 Connectors
Appearance Cable type Part number
Straight 2 m (6.56 ft) Four-wire type XS3F-M421-402-A
5 m (16.40 ft)
XS3F-M421-405-A
Right angle 2 m (6.56 ft) XS3F-M422-402-A
5 m (16.40 ft) XS3F-M422-405-A
Specifications
Item Sensing method Through-beam Polarized retroreflective Diffuse reflective
NP N output E3Z-T61/T66 E3Z-R61/R66 E3Z-D61/D66 E3Z-D62/D67
PN P output E3Z-T81/T86 E3Z-R81/R86 E3Z-D81/D86 E3Z-D82/D87
Sensing distance 15 m 100 mm (4 m Note 1)
(when using E39-R1S)
100 mm (3 m Note 2)
(when using E39-R1)
White paper
(100×100 mm):
100 mm
White paper
(300×300 mm):
1m
Standard sensing object Opaque: 12 mm
(dia. min.)
Opaque: 75 mm
(dia. min.)
---
Hysteresis --- 20% max. of setting distance
Directional angl e Both emitter and
receiver: 3 to 15°
2to10° ---
Light source (wave length) Infrared LED (860 nm) Red LED (680 nm) Infrared LED (860 nm)
Pow er supply voltage 12 to 24 VDC ±10% including 10% (p-p) max. ripple
Current consumption Emitter: 15 mA
Receiver: 20 mA
30 mA max.
Control output 100 mA max. at 26.4 VD C, open coll ector output
(resi dual vol tage: 1 V max.)
L-ON/D-ON, switch selectable
Circuit protection Load short-circuit and
reversed power supply
protection
Reversed power supply connection, output short-circuit, and mutual
interference protection
Response time 1msmax.
Sensitivi ty adjustment One-turn potentiometer
Ambient
Incandescent l amp 3,000 l ux max.
illumination
(recei ver side)
Sunl ight 10,000 lux max.
Ambient Operating -- 2 5 °Cto55°C(--13°F to 131°F)
temperature
Storage -- 4 0 °Cto70°C(--40°F to 158°F) with no i cing or condensation
Ambient Operating 35% to 85%
humidity
Storage 35% to 95% with no condensation
Insulation resistance 20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC , 50/60 Hz for 1 min
Vi bration resistance 10 to 55 Hz, 1.5-mm double amplitude or 300 m/s
2
for 2 hours each in X , Y, and Z axes
Shock
resistance
Destruction 500 m/s
2
3 times each in X , Y, and Z axes
Enclosure rating IP67 (IEC 60529)
Approvals CE
Connection method 2 m cable or M8 connector
Indicator Operation indicator (orange)
Stability indicator (green)
Emitter has power i ndicator (orange) only
Weight Pre-wired cable (2 m) Approx. 120 g (4.2 oz) Approx. 65 g (2.3 oz)
(packed state)
Connector Approx. 30 g (1.1 oz) Approx. 20 g (0.7 oz)
Material Case: PBT (polybutylene terephthalate); Lens: Methacrylate resin
Accessories Instruction manual (Order R eflector and Mounting Bracket separately.)
Note: 1. Sensing distance can be extended up to 4 meters when the E39-R1S reflector is used.
2. Sensing distance can be extended up to 3 meters when the E39-R1 reflector is used.