E3Z E3Z
14
Straight
XS3F-M421-402-A (L=2 m)
XS3F-M421-405-A (L=5 m)
Right Angle
XS3F-M422-402-A (L=2 m)
XS3F-M422-405-A (L=5 m)
J M8 CONNECTOR CORDSE TS
4 (0.16) dia.
9dia.
(0.35)
21.5
(0.85)
31.4
(1.24)
50 (1.97)
30
20.5
(0.81)
23.1
(0.91)
4 (0.16) dia.
50 (1.97)
9 (0.35) dia.
2.15
0.5
3.4
1.95
30
5
5
Precautions
To ensure safe sensor operation, please foll ow the following
precautions:
J WIRING
Power Supply Voltage
Make sure that the power supply to the Sensor is w ithin the rated
voltage range.
Load Short-circuiting
Do not short-circuit the load, or the Sensor may be damaged.
Polarity
Correct polarity wiring i s required to prevent damage to the
sensor.
Connection Without Load
Do not connect power supply to the Sensor with no load
connected, or the internal elements may explode or burn.
J OPERATING ENVIRONMENT
Do not use the Sensor in locations with explosive or flammable
gas.
J SETTINGS
Power Reset Time
The S ensor is ready to operate 100 ms after the Sensor is turned
ON. If the load and Sensor are connected to independent power
suppli es respectively, be sure to turn ON the Sensor before
turning the load ON.
J CONNECTIONS
M8 Metal Connector
• Turn off power before disconnecting the sensor.
• Remove the connector cover before connecting or di scon-
necting the metal connector.
• Secure the connector cover by hand. Do not use any pliers,
or the connector may be damaged.
• The proper tightening torque range is between 0.3 and 0.4
N S m. Be sure to tighten the connector securely in order to
maintain the the specified degree of protection and to keep
the connector from loosening due to vibrati on.
J MOUNTING
Use M3 screws to mount the sensor and tighten each screw to a
maximum torque of 0.53 N S m.
E3Z-jjj E39-L104 Mounting Bracket
(sold separately)
