MF1SEP_H_10X1_SDS All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2017. All rights reserved.
Product short data sheet
COMPANY PUBLIC
Rev. 3.1 — 16 March 2017
328631 11 of 17
NXP Semiconductors
MF1SEP(H)10x1
MIFARE PLUS SE - Secure contactless smart card IC
9.5 Security level 3 command overview
Command set for security level switch and originality function using ISO/IEC 14443-4
protocol
First Authenticate (part 1) first authenticate
Following Authenticate (part 1) following authenticate
Authenticate (part 2) second authentication step
Table 7. Security level 1 command overview
…continued
MF1ICS50, MF1ICS70,
MF1ICS20 commands
Description
Table 8. Security level 3 command overview
Command Description
MIFARE Plus commands
First Authenticate (part 1) first authenticate
Following Authenticate (part 1) following authenticate
Authenticate (part 2) second authentication step
ResetAuth reset the authentication step
READ commands
Read Plain MACed reading in plain, MAC on response, MAC on command
WRITE commands
Write MACed writing encrypted, MAC on response, MAC on command
Write Plain MACed writing in plain, MAC on response, MAC on command
VALUE operations
Increment MACed incrementing a value encrypted, MAC on response, MAC on
command
Decrement MACed decrementing a value encrypted, MAC on response, MAC on
command
Transfer MACed transferring a value, MAC on response, MAC on command
Increment Transfer MACed combined incrementing and transferring a value encrypted, MAC
on response, MAC on command
Decrement Transfer MACed combined decrementing and transferring a value encrypted, MAC
on response, MAC on command
Restore MACed restoring a value, MAC on response, MAC on command
Virtual card concept
Virtual Card Support Last check if the virtual card concept is supported, communicate PCD
capabilities and retrieve the UID
Deselect Virtual Card deselect the virtual card