OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MF1SEP1031DA4/03J

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17
MF1SEP_H_10X1_SDS All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2017. All rights reserved.
Product short data sheet
COMPANY PUBLIC
Rev. 3.1 — 16 March 2017
328631 10 of 17
NXP Semiconductors
MF1SEP(H)10x1
MIFARE PLUS SE - Secure contactless smart card IC
9.2 Security level 0, 1, 3: ISO/IEC 14443-4
Please find more information on ISO/IEC 14443 in Ref. 4 as well as on the settings of
ATQA, SAK and ATS in Ref. 3
.
9.3 Security level 0 command overview
9.4 Security level 1 command overview
Table 5. ISO/IEC 14443-4
Command Description
RATS the response to the RATS command identifies the PICC type to the
PCD.
PPS the PPS command allows an individual selection of the
communication baud rate between PCD and PICC. It is possible
for the MF1SEP(H)10x1 to individually set the communication
baud rate independently of each other for both directions i.e.
MF1SEP(H)10x1 allows a non-symmetrical information
interchange speed.
DESELECT deselection according to ISO/IEC 14443-4
Table 6. Security level 0 command overview
Command Description
Write Perso pre-personalization of AES keys and all blocks
Commit Perso switch to security level 1
First Authenticate (part 1) first authenticate
Following Authenticate (part 1) following authenticate
Authenticate (part 2) second authentication step
Table 7. Security level 1 command overview
MF1ICS50, MF1ICS70,
MF1ICS20 commands
Description
MF Authenticate key A authentication with key A
MF Authenticate key B authentication with key B
MF Read reading data
MF Write writing data
MF Increment incrementing a value
MF Decrement decrementing a value
MF Restore restoring a value
MF Transfer transferring a value
Commands using backwards compatibility protocol, see Section 8.2.1
Following Authenticate (part 1) following authenticate; protocol used as described in
Section 8.2.1
Authenticate (part 2) second authentication step; protocol used as described in
Section 8.2.1
MF1SEP_H_10X1_SDS All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2017. All rights reserved.
Product short data sheet
COMPANY PUBLIC
Rev. 3.1 — 16 March 2017
328631 11 of 17
NXP Semiconductors
MF1SEP(H)10x1
MIFARE PLUS SE - Secure contactless smart card IC
9.5 Security level 3 command overview
Command set for security level switch and originality function using ISO/IEC 14443-4
protocol
First Authenticate (part 1) first authenticate
Following Authenticate (part 1) following authenticate
Authenticate (part 2) second authentication step
Table 7. Security level 1 command overview
…continued
MF1ICS50, MF1ICS70,
MF1ICS20 commands
Description
Table 8. Security level 3 command overview
Command Description
MIFARE Plus commands
First Authenticate (part 1) first authenticate
Following Authenticate (part 1) following authenticate
Authenticate (part 2) second authentication step
ResetAuth reset the authentication step
READ commands
Read Plain MACed reading in plain, MAC on response, MAC on command
WRITE commands
Write MACed writing encrypted, MAC on response, MAC on command
Write Plain MACed writing in plain, MAC on response, MAC on command
VALUE operations
Increment MACed incrementing a value encrypted, MAC on response, MAC on
command
Decrement MACed decrementing a value encrypted, MAC on response, MAC on
command
Transfer MACed transferring a value, MAC on response, MAC on command
Increment Transfer MACed combined incrementing and transferring a value encrypted, MAC
on response, MAC on command
Decrement Transfer MACed combined decrementing and transferring a value encrypted, MAC
on response, MAC on command
Restore MACed restoring a value, MAC on response, MAC on command
Virtual card concept
Virtual Card Support Last check if the virtual card concept is supported, communicate PCD
capabilities and retrieve the UID
Deselect Virtual Card deselect the virtual card
MF1SEP_H_10X1_SDS All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2017. All rights reserved.
Product short data sheet
COMPANY PUBLIC
Rev. 3.1 — 16 March 2017
328631 12 of 17
NXP Semiconductors
MF1SEP(H)10x1
MIFARE PLUS SE - Secure contactless smart card IC
10. Limiting values
[1] Stresses above one or more of the limiting values may cause permanent damage to the device.
[2] Exposure to limiting values for extended periods may affect device reliability.
[3] MIL Standard 883-C method 3015; Human body model: C = 100 pF, R = 1.5 k.
11. Abbreviations
Table 9. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max
[1][2]
Unit
I
I
input current - 30 mA
P
tot
/pack total power dissipation per package - 200 mW
T
stg
storage temperature 55 125 C
T
amb
ambient temperature 25 70 C
V
ESD
electrostatic discharge voltage
[3]
2- kV
I
lu
latch-up current 100 - mA
Table 10. Abbreviations and symbols
Acronym Description
AES Advanced Encryption Standard
EEPROM Electrically Erasable Programmable Read-Only Memory
LCR L = inductance, Capacitance, Resistance (LCR meter)
MAC Message Authentication Code
NUID Non-Unique IDentifier
NV Non-Volatile memory
PCD Proximity Coupling Device (Contactless Reader)
PICC Proximity Integrated Circuit Card (Contactless Card)
PPS Protocol Parameter Selection
RATS Request Answer To Select
REQA REQuest Answer
SAK Select AcKnowledge, type A
SECS-II SEMI Equipment Communications Standard part 2
UID Unique IDentifier
VC Virtual Card, one MIFARE Plus PICC is one virtual card
WUPA Wake-Up Protocol type A
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17

MF1SEP1031DA4/03J

Mfr. #:
Buy MF1SEP1031DA4/03J
Manufacturer:
NXP Semiconductors
Description:
RFID Transponders Secure Contactless Smart Card IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet