This is information on a product in full production.
www.st.com
High-performance MEMS audio sensor:
fully differential analog bottom-port microphone
Datasheet - production data
Features
• Single supply voltage operation
• Fully differential output
• Omnidirectional sensitivity
• High signal-to-noise ratio
• High bandwidth
• Package compliant with reflow soldering
• High RF immunity
• ECOPACK
®
, RoHS, and “Green” compliant
Description
The MP23AB01DH is a compact, low-power
microphone built with a capacitive sensing
element and an IC interface.
The sensing element, capable of detecting
acoustic waves, is manufactured using a
specialized silicon micromachining process to
produce audio sensors.
The MP23AB01DH has sensitivity of 38 dB
±1 dB, an acoustic overload point of 135 dBSPL
with minimum 65 dB signal-to-noise ratio.
The MP23AB01DH has fully differential output in
order to minimize common mode noise.
The MP23AB01DH is available in a package
compliant with reflow soldering and is guaranteed
to operate over an extended temperature range
from -40 °C to +85 °C.
Table 1: Device summary
Order code
Temp.
range (°C)
Package
Packing
MP23AB01DH
-40 to +85
(3.35 x 2.5 x 0.98) mm
Tray
MP23AB01DHTR
-40 to +85
(3.35 x 2.5 x 0.98) mm
Tape and
reel