OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

NL3S22AHMUTAG

P1-P3P4-P6P7-P9P10-P10
© Semiconductor Components Industries, LLC, 2017
July, 2018 − Rev. 3
1 Publication Order Number:
NL3S22AH/D
NL3S22AH, NL3S22UH
USB 2.0 + Audio Switch
The NL3S22AH/NL3S22UH is a double−pole/double−throw
(DPDT) analog switch for routing high speed differential data and
audio. The differential channels are compliant with High Speed USB
2.0, Full Speed USB 1.1, Low Speed USB 1.0 and any generic UART
protocol. The multi−purpose audio path is capable of passing signals
with negative voltages as low as 3 V below ground and features shunt
resistors to reduce Pop and Click noise in the audio system.
For the NL3S22AH, the audio path (AUDP/AUDN) will be selected
with SEL=0 with the device enabled (EN = 1). For the NL3S22UH,
the high speed data path (HDP/HDN) will be selected with SEL=0
with the device enabled (EN = 1).
Features
• V
CC
Range: 2.7 V to 3.7 V
• Control Pins Compatible with 1.8 V Interfaces
• I
CC
: 60 mA (Typ)
• ESD Performance: 2 kV HBM
• Available in 1.4 mm x 1.8 mm UQFN10
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
High Speed Data Path
• Input Signal Range: 0 V to 4.5 V
• R
DS(on)
: 5.4 W (Typ)
• C
ON
: 8.7 pF (Typ)
• Data Rate: USB 2.0–Compliant – up to 480 Mbps
• Bandwidth: >811 MHz
Audio Path
• Input Signal Range: −3.0 V to 3.0 V
• R
DSON
: 0.56 W (Typ)
• R
ON(FLAT)
: 0.004 W (Typ)
• THD+N:
− 113 dB (R
L
= 32 W / V
IS
= 1.0 V
RMS
)
− 109 dB (R
L
= 16 W / V
IS
= 0.4 V
RMS
)
Applications
• Smartphones
• Tablets
• USB 2.0 Hosts/Peripherals
• Audio / High−Speeds Data Switching
• USB Type−C Switching
www.onsemi.comwww.onsemi.com
MARKING
DIAGRAM
XX = AY for NL3S22AHMUTAG
= DW for NL3S22UHMUTAG
M = Date Code
G = Pb−Free Device
1
UQFN10
CASE 488AT
(Note: Microdot may be in either location)
XX MG
G
Device Package Shipping
†
ORDERING INFORMATION
NL3S22AHMUTAG UQFN10
(Pb−Free)
3000 / Tape &
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
NL3S22UHMUTAG UQFN10
(Pb−Free)
3000 / Tape &
Reel
NL3S22AH, NL3S22UH
www.onsemi.com
2
V
CC
HDP
AUDP
EN
SEL
GND
D+
D−
HDN
AUDN
Control Logic
Shunt
Shunt
Figure 1. Block Diagram
FUNCTION TABLE
EN
SEL
Shunt Status D+/D− Function
NL3S22AH NL3S22UH
0 X X ON No Connect (Power Down)
1 0 1 OFF AUDP/AUDN
1 1 0 ON HDP/HDN
Figure 2. UQFN10 – Top Through View
PIN DESCRIPTION
Pin Name Pin Description
HDP 1 High Speed Differential Data (+)
HDN 2 High Speed Differential Data (−)
GND 3 Ground
AUDN 4 Audio Signal (−)
SEL 5 Function Select
D− 6 Audio/Data Common I/O (−)
D+ 7 Audio/Data Common I/O (+)
EN 8 Chip Enable
AUDP 9 Audio Signal (+)
V
CC
10 Power Supply
NL3S22AH, NL3S22UH
www.onsemi.com
3
MAXIMUM RATINGS
Rating Symbol Value Unit
V
CC
Positive DC Supply Voltage −0.5 to +4.2 V
V
IS
Analog Input/Output Voltage HDP, HDN −0.5 to +5.5
V
AUDP, AUDN −3.5 to +4.2
D+, D− −3.5 to +5.5
V
IN
Digital Control Pin Voltage on EN, SEL −0.5 to V
CC
+ 0.5 V
T
s
Storage Temperature −55 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 seconds 260 °C
T
J
Junction Temperature Under Bias 150 °C
MSL Moisture Sensitivity (Note 1) Level 1
I
LU
Latchup Current (Note 2) ±100 mA
ESD ESD Protection (Note 3) Human Body Model
Charged Device Model
2000
2000
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Moisture Sensitivity Level (MSL): 1 per IPC/JEDEC standard: J−STD−020A.
2. Latch up Current Maximum Rating: ±100 mA per JEDEC standard: JESD78.
3. This device series contains ESD protection and passes the following tests:
Human Body Model (HBM) ±2.0 kV per JEDEC standard: JESD22−A114 for all pins.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
Positive DC Supply Voltage 2.7 3.7 V
V
IS
Switch Input / Output Voltage (Note 4) HDP, HDN 0 4.5
V
AUDP, AUDN −3.0 3.0
D+, D− −3.0 4.5
V
IN
Digital Control Input Voltage GND V
CC
V
T
A
Operating Temperature Range −40 +85 °C
4. If the audio channel is not in use, it is recommended that no signals are applied on the audio inputs AUDN and AUDP.
P1-P3P4-P6P7-P9P10-P10

NL3S22AHMUTAG

Mfr. #:
Buy NL3S22AHMUTAG
Manufacturer:
ON Semiconductor
Description:
USB Switch ICs USB 2.0 + AUDIO SWITCH
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet