IDT
TM
/ICS
TM
Four Output Differential Buffer for PCIe Gen 2 with Spread 1626 09/17/09
ICS9DS400
Four Output Differential Buffer for PCIe for Gen 2 with Spread
11
Advance Information
General SMBus serial interface information for the ICS9DS400
How to Write:
• Controller (host) sends a start bit.
• Controller (host) sends the write address D8
(h)
• ICS clock will acknowledge
• Controller (host) sends the begining byte location = N
• ICS clock will acknowledge
• Controller (host) sends the data byte count = X
• ICS clock will acknowledge
• Controller (host) starts sending Byte N through
Byte N + X -1
• ICS clock will acknowledge each byte one at a time
• Controller (host) sends a Stop bit
How to Read:
• Controller (host) will send start bit.
• Controller (host) sends the write address D8
(h)
• ICS clock will acknowledge
• Controller (host) sends the begining byte
location = N
• ICS clock will acknowledge
• Controller (host) will send a separate start bit.
• Controller (host) sends the read address D9
(h)
• ICS clock will acknowledge
• ICS clock will send the data byte count = X
• ICS clock sends Byte N + X -1
• ICS clock sends Byte 0 through byte X (if X
(h)
was written to byte 8).
• Controller (host) will need to acknowledge each byte
• Controllor (host) will send a not acknowledge bit
• Controller (host) will send a stop bit
ICS (Slave/Receiver)
T
WR
ACK
ACK
ACK
ACK
ACK
P
Byte N + X - 1
Data Byte Count = X
Beginning Byte N
stoP bit
X Byte
Index Block Write Operation
Slave Address D8
(h)
Beginning Byte = N
WRite
T starT bit
WR WRite
RT Repeat starT
RD ReaD
Beginning Byte N
Byte N + X - 1
N Not acknowledge
P stoP bit
ICS (Slave/Receiver)
X Byte
ACK
ACK
Data Byte Count = X
ACK
Slave Address D9
(h)
Index Block Read Operation
Slave Address D8
(h)
Beginning Byte = N
ACK
ACK
