®
ADC1005S060
Single 10 bits ADC, up to 60 MHz
Rev. 03 — 2 July 2012 Product data sheet
1. General description
The ADC1005S060 is a 10-bit high-speed low-power Analog-to-Digital Converter (ADC)
for professional video and other applications. It converts the analog input signal into 10-bit
binary or gray coded digital words at a maximum sampling rate of 60 MHz. All digital
inputs and outputs are Transistor-Transistor Logic (TTL) and CMOS compatible, although
a low-level sine wave clock input signal is allowed.
The device requires an external source to drive its reference ladder.
2. Features
10-bit resolution (binary or gray code)
Sa
mpling rate up to 60 MHz
DC sampling allowed
One
clock cycle conversion only
High
signal-to-noise ratio over a large analog input frequency range (9.3 effective bits
at 5 MHz full-scale input at f
clk
= 60 MHz)
No missing cod
es guaranteed
In-R
ange (IR) CMOS output
TTL
and CMOS levels compatible digital inputs
2
.7 V to 3.6 V CMOS digital outputs
Low-lev
el AC clock input signal allowed
Exte
rnal reference voltage regulator
Powe
r dissipation only 312 mW (typical)
L
ow analog input capacitance, no buffer amplifier required
No samp
le-and-hold circuit required
3. Applications
Video data digitizing
Radar
Bar
code scanners
Digit
al instrumentation
T
ransient signal analysis
m
odulators
Medical imaging
