Data Sheet 6 Rev. 1.1, 2004-01-01
TLE 4299
Figure 4 Pin Configuration (top view)
Table 2 Pin Definitions and Functions (TLE 4299 GM)
Pin No. Symbol Function
1RADJReset Threshold; if not needed connect to GND.
2DReset Delay; connect to GND via external delay capacitor for
setting delay time.
3, 4, 5 GND Ground
6INH
Inhibit; If not needed connect to input pin I; a high signal switches
the regulator ON.
7ROReset Output; open-collector output, internally connected to Q
via a pull-up resistor of 20 k
Ω. Keep open, if the pin is not needed.
8SOSense Output; open-collector output, internally connected to Q
via a 20 k
Ω pull-up resistor. Keep open, if the pin is not needed.
9Q5-V Output; connect to GND with a 22
µF capacitor, ESR < 5 Ω.
10, 11, 12 GND Ground
13 I Input; block to GND directly at the IC by a ceramic capacitor.
14 SI Sense Input; if not needed connect to Q.
AEP02831
141RADJ SI
D2 13
GND 3 12
GND 4 11
10
GND 5
69
INH
RO 7 8
I
GND
GND
GND
Q
SO
P-DSO-14-8