MIC5219-5.0YM5-TR

June 2009 1 M0371-061809
Micrel, Inc. MIC5219
Typical Applications
MIC5219
500mA-Peak Output LDO Regulator
General Description
The MIC5219 is an efcient linear voltage regulator with high
peak output current capability, very-low-dropout voltage, and
better than 1% output voltage accuracy. Dropout is typically
10mV at light loads and less than 500mV at full load.
The MIC5219 is designed to provide a peak output current for
start-up conditions where higher inrush current is demanded.
It features a 500mA peak output rating. Continuous output
current is limited only by package and layout.
The MIC5219 can be enabled or shut down by a CMOS or
TTL compatible signal. When disabled, power consumption
drops nearly to zero. Dropout ground current is minimized to
help prolong battery life. Other key features include reversed-
battery protection, current limiting, overtemperature shutdown,
and low noise performance with an ultra-low-noise option.
The MIC5219 is available in adjustable or xed output volt-
ages in the space-saving 6-pin (2mm × 2mm) MLF
®
, 6-pin
(2mm × 2mm) Thin MLF
®
SOT-23-5 and MM8
®
8-pin power
MSOP packages. For higher power requirements see the
MIC5209 or MIC5237.
All support documentation can be found on Micrel’s web site
at www.micrel.com.
Features
500mA output current capability
SOT-23-5 package - 500mA peak
2mm×2mm MLF
®
package - 500mA continuous
2mm×2mm Thin MLF
®
package - 500mA
continuous
MSOP-8 package - 500mA continuous
Low 500mV maximum dropout voltage at full load
Extremely tight load and line regulation
Tiny SOT-23-5 and MM8™ power MSOP-8 package
Ultra-low-noise output
Low temperature coefcient
Current and thermal limiting
Reversed-battery protection
CMOS/TTL-compatible enable/shutdown control
Near-zero shutdown current
Applications
Laptop, notebook, and palmtop computers
Cellular telephones and battery-powered equipment
Consumer and personal electronics
PC Card V
CC
and V
PP
regulation and switching
SMPS post-regulator/DC-to-DC modules
High-efciency linear power supplies
1
2
3
4
8
7
6
5
MIC5219-5.0BMM
2.2µF
tantalum
V
OUT
5V
V
IN
6V
ENABLE
SHUTDOWN
470pF
5V Ultra-Low-Noise Regulator
15
2
3
4
2.2µF
tantalum
470pF
V
OUT
3.3V
MIC5219-3.3BM5
V
IN
4V
ENABLE
SHUTDOWN
3.3V Ultra-Low-Noise Regulator
Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
MM8 is a registered trademark of Micrel, Inc.
MicroLeadFrame and MLF are registered trademarks of Amkor Technology, Inc..
ENABLE
SHUTDOWN
MIC5219-x.xYML
1
EN
6
C
BYP
(optional)
V
IN
V
OUT
C
OUT
5
4
2
3
Ultra-Low-Noise Regulator (Fixed)
ENABLE
SHUTDOWN
MIC5219YMT
1
EN
6
470pF
V
IN
V
OUT
2.2µF
5
4
2
3
R1
R2
+
Ultra-Low-Noise Regulator (Adjustable)
Micrel, Inc. MIC5219
June 2009 2 M0371-061809
Ordering Information
Part Number Marking
Standard Pb-Free Standard Pb-Free* Volts Temp. Range Package
MIC5219-2.5BMM MIC5219-2.5YMM 2.5V –40°C to +125°C MSOP-8
MIC5219-2.85BMM MIC5219-2.85YMM 2.85V –40°C to +125°C MSOP-8
MIC5219-3.0BMM MIC5219-3.0YMM 3.0V –40°C to +125°C MSOP-8
MIC5219-3.3BMM MIC5219-3.3YMM 3.3V –40°C to +125°C MSOP-8
MIC5219-3.6BMM MIC5219-3.6YMM 3.6V –40°C to +125°C MSOP-8
MIC5219-5.0BMM MIC5219-5.0YMM 5.0V –40°C to +125°C MSOP-8
MIC5219BMM MIC5219YMM Adj. –40°C to +125°C MSOP-8
MIC5219-2.5BM5 MIC5219-2.5YM5 LG25 LG25 2.5V –40°C to +125°C SOT-23-5
MIC5219-2.6BM5 MIC5219-2.6YM5 LG26 LG26 2.6V –40°C to +125°C SOT-23-5
MIC5219-2.7BM5 MIC5219-2.7YM5 LG27 LG27 2.7V –40°C to +125°C SOT-23-5
MIC5219-2.8BM5 MIC5219-2.8YM5 LG28 LG28 2.8V –40°C to +125°C SOT-23-5
MIC5219-2.8BML MIC5219-2.8YML G28 G28 2.8V –40°C to +125°C 6-Pin 2×2 MLF
®
MIC5219-2.85BM5 MIC5219-2.85YM5 LG2J LG2J 2.85V –40°C to +125°C SOT-23-5
MIC5219-2.9BM5 MIC5219-2.9YM5 LG29 LG29 2.9V –40°C to +125°C SOT-23-5
MIC5219-3.1BM5 MIC5219-3.1YM5 LG31 LG31 3.1V –40°C to +125°C SOT-23-5
MIC5219-3.0BM5 MIC5219-3.0YM5 LG30 LG30 3.0V –40°C to +125°C SOT-23-5
MIC5219-3.0BML MIC5219-3.0YML G30 G30 3.0V –40°C to +125°C 6-Pin 2×2 MLF
®
MIC5219-3.3BM5 MIC5219-3.3YM5 LG33 LG33 3.3V –40°C to +125°C SOT-23-5
MIC5219-3.3BML MIC5219-3.3YML G33 G33 3.3V –40°C to +125°C 6-Pin 2×2 MLF
®
MIC5219-3.6BM5 MIC5219-3.6YM5 LG36 LG36 3.6V –40°C to +125°C SOT-23-5
MIC5219-5.0BM5 MIC5219-5.0YM5 LG50 LG50 5.0V –40°C to +125°C SOT-23-5
MIC5219BM5 MIC5219YM5 LGAA LGAA Adj. –40°C to +125°C SOT-23-5
MIC5219YMT GAA Adj. –40°C to +125°C 6-Pin 2x2 Thin MLF
®**
MIC5219-5.0YMT G50 5.0V –40°C to +125°C 6-Pin 2x2 Thin MLF
®**
Other voltages available. Consult Micrel for details.
* Over/underbar may not be to scale. ** Pin 1 identier = ▲.
1
2
3
4
8
7
6
5
GND
GND
GND
GND
EN
IN
OUT
BYP
MIC5219-x.xBMM / MM8
®
/ MSOP-8
Fixed Voltages
(Top View)
1
2
3
4
8
7
6
5
GND
GND
GND
GND
EN
IN
OUT
BYP
MIC5219YMM / MIC5219BMM
MM8
®
MSOP-8
Adjustable Voltage
(Top View)
IN
OUTBYP
EN
LGxx
13
4 5
2
GND
MIC5219-x.xBM5 / SOT-23-5
Fixed Voltages
(Top View)
Part
Identification
IN
OUTADJ
EN
LGAA
13
45
2
GND
MIC5219BM5 / SOT-23-5
Adjustable Voltage
(Top View)
Pin Conguration
MIC5219-x.xBML
6-Pin 2mm × 2mm MLF
®
(ML)
(Top View)
1EN
GND
IN
6 NC
ADJ
OUT
5
4
2
3
MIC5219YMT
6-Pin 2mm × 2mm Thin MLF
®
(MT)
(Top View)
June 2009 3 M0371-061809
Micrel, Inc. MIC5219
Pin Description
Pin No. Pin No. Pin No. Pin Name Pin Function
MLF-6 MSOP-8 SOT-23-5
TMLF-6
3 2 1 IN Supply Input.
2 5–8 2 GND Ground: MSOP-8 pins 5 through 8 are internally connected.
4 3 5 OUT Regulator Output.
1 1 3 EN Enable (Input): CMOS compatible control input. Logic high = enable; logic
low or open = shutdown.
6 4 (xed) 4 (xed) BYP Reference Bypass: Connect external 470pF capacitor to GND to reduce
output noise. May be left open.
5(NC) 4 (adj.) 4 (adj.) ADJ Adjust (Input): Feedback input. Connect to resistive voltage-divider network.
EP GND Ground: Internally connected to the exposed pad. Connect externally to
GND pin.

MIC5219-5.0YM5-TR

Mfr. #:
Manufacturer:
Description:
LDO Voltage Regulators
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union