ISL29038
3
FN7851.1
January 23, 2015
Submit Document Feedback
Absolute Maximum Ratings
Thermal Information
V
DD
Supply Voltage between VDD and GND . . . . . . . . . . . . . . . . . . . . . .4.0V
I
2
C Bus Pin Voltage (SCL, SDA). . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 4.0V
I
2
C Bus Pin Current (SCL, SDA). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <10mA
REXT Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.5V to VDD + 0.5V
IRDR Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.5V
INT
Pin Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 4.0V
INT
Pin Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <10mA
ESD Rating
Human Body Model (Note 6
). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kV
Thermal Resistance (Typical)
JA
(°C/W)
JC
(°C/W)
8 Ld ODFN (Notes 4
, 5) . . . . . . . . . . . . . . . . 88 14
Maximum Die Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+90°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +100°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Pb-Free Reflow Profile (*) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB477
*Peak temperature during solder reflow +260°C max
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4.
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379
.
5. For
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
6. Tested per JESD22-A114E, ESD on all pins is 2kV except IRDR, which is 1.5kV.
Electrical Specifications V
DD
= 3.0V, T
A
= +25°C, R
EXT
= 499kΩ 1% tolerance.
PARAMETER DESCRIPTION TEST CONDITION
MIN
(Note 7
)TYP
MAX
(Note 7)UNITS
INPUT POWER
V
DD
Power Supply Range 2.25 3.0 3.63 V
I
DD_OFF
Supply Current when Powered Down ALS_EN = 0; PROX_EN = 0 0.2 1.0 µA
I
DD_NORM
Supply Current for ALS+Prox in Sleep Time ALS_EN = 1; PROX_EN = 1 125 140 µA
I
DD_PRX_SLP
Supply Current for Prox in Sleep Time ALS_EN = 0; PROX_EN = 1 95 µA
I
DD_ALS
Supply Current for ALS ALS_EN = 1; PROX_EN = 0 95 µA
ADC (ALS AND PROX)
t
INTGR_ALS
12-bit ALS Conversion Time 80 95 110 ms
t
INTGR_PROX
8-bit Prox Conversion Time 0.4 0.50 0.6 ms
DATA
ALS_0
ALS Result when Dark E
AMBIENT
= 0 Lux, 2k range 1 Counts
DATA
ALS_F
Full-Scale ALS ADC Code E
AMBIENT
> selected range maximum Lux 4095 Counts
ΔDATA
1
DATA
Output Variation Over Light Sources:
Fluorescent, Incandescent and Sunlight
Ambient light sensing, no cover glass
After programmable active IR compensation
(Note 8
)
±10 %
ΔDATA
2
DATA
Output Variation Over Light Sources:
Fluorescent, Incandescent and Sunlight
Ambient light sensing under cover glass
After programmable active IR compensation
(Note 8
)
±10 %
Linearity ALS ADC Data Linearity 20% - 80% of full range ±5 %
DATA
ALS_0
Light Count, ALS_Range 125 Lux E = 50 Lux (Note 9),
ALS_RANGE = 0
1555 1767 1979 Counts
DATA
ALS_1
Light Count, ALS_Range 250 Lux E = 50 Lux (Note 9),
ALS_RANGE = 1
771 876 981 Counts
DATA
ALS_2
Light Count, ALS_Range 2000 Lux E = 300 Lux (Note 9),
ALS_RANGE = 2
585 665 745 Counts
DATA
ALS_3
Light Count, ALS_Range 4000 Lux E = 300 Lux (Note 9),
ALS_RANGE = 3
292 331 371 Counts
DATA
PROX_0
Prox Data without Object in Path 1Counts
DATA
PROX_F
Full-Scale Prox ADC Code 255 Counts