Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Pressure Sensor/PS-A (ADP5)
0.0
0.0
1.0
2.0
3.0
4.0
5.0
3.0 6.0
Output voltage (V)
Applied pressure (kPa)
0 32 10 50 60 14025 77
70 158
1.00
0.80
0.60
0.40
0.20
0.00
Temperature (°C °F)
Offset voltage (V)
4.50
4.30
4.10
3.90
3.70
3.50
intial after test
Span voltage (V)
intial 100h 500h
1.00
0.80
0.60
0.40
0.20
0.00
Offset voltage (V)
4.50
4.30
4.10
3.90
3.70
3.50
Span voltage (V)
0 32 10 50 60 14025 77
70 158
Temperature (°C °F)
1.00
0.80
0.60
0.40
0.20
0.00
intial after test
Offset voltage (V)
intial 100h 500h
4.5
4.3
4.1
3.9
3.7
3.5
Span voltage (V)
intial
1.00
0.80
0.60
0.40
0.20
0.00
after test
Offset voltage (V)
4.50
4.30
4.10
3.90
3.70
3.50
intial after test
Span voltage (V)
Low pressure type
1 Output voltage
ADP51B61
Drive voltage : 5 V.DC
Temperature : 25 °C
77 °F
Applied pressure : 0 to 6 kPa
3 Ambient temperature characteristics
Ambient temperature : 25 °C 77 °F 0 °C 32 °F 10 °C 50 °F 60 °C 140 °F 70 °C 158 °F
2 THB (high temperature high humidity bias test)
ADP51B61
Within 85 °C
185 °F and 85% RH
5 V applied between No.2 (Vdd) and No.3 (GND)
Applied pressure : 0 kPa
5 Vibration test
ADP51B61
Vibration applied : 10 to 55 Hz, amplitude : 1.5mm, x, y and z directions, 2 hrs each
Applied pressure : 0 kPa
4 Shock test
ADP51B61
Shock applied : 981 m/s
2
, 3 times in x, y and z directions
Applied pressure : 0 kPa
Aug. 201500
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Pressure Sensor/PS-A (ADP5)
1 cycle (24h)
65 °C
149 °F
65 °C 149 °F
25 °C
77 °F
−10 °C
14 °F
25 °C
77 °F
0% RH
95% RH
2.5h 2.5h 2.5h 2.5h 3.5h1.5h3h 3h 3h
Temp.
Time
□□□
1.00
0.80
0.60
0.40
0.20
0.00
intial 10 cyc
Offset voltage (V)
4.50
4.30
4.10
3.90
3.70
3.50
intial 10 cyc
Span voltage (V)
6 Temperature/humidity cycle test
ADP51B61
Exposed to 10 cycles in the temperature
and humidity conditions given below.
Applied pressure : 0kPa
Evaluation Test
Classifi cation Tested item Tested condition
Result
Environmental
characteristics
Storage at high temperature
Temperature : Left in a 85 °C 185 °F constant temperature bath; Time : 100 hrs.
Passed
Storage at low temperature
Temperature : Left in a –20 °C –4 °F constant temperature bath; Time : 100 hrs.
Passed
Humidity resistance
Temperature/humidity : Left at 40 °C 104 °F, 90 % RH; Time : 100 hrs.
Passed
Temperature cycle
Temperature : –20 °C to 85 °C –4 °F to 185 °F; 1 cycle : 30 min.; Times of cycle : 100 Passed
Endurance
characteristics
High temperature/
high humidity operation
Temperature/humidity : 40 °C
104 °F, 90% RH;
Operation times : 10
6
, rated voltage applied
Passed
Mechanical
characteristics
Vibration resistance
Double amplitude : 1.5 mm
0.059 inch; Vibration : 10 to 55 Hz;
Applied vibration direction : X, Y, Z 3 directions; Times : 2 hrs each
Passed
Dropping resistance Dropping height : 75 cm 29.528 inch; Times : 2 times
Passed
Terminal strength
Pulling strength : 9.8 N {1 kgf}, 10 sec.;
Bending strength : 4.9 N {0.5 kgf}, left and right 90 ° 1 time
Passed
Soldering
Characteristics
Solderbility Temperature : 230 °C
446 °F; Time : 5 sec.
Passed
Heat resistance (DIP)
Temperature : 260 °C 500 °F; Time : 10 sec.
Passed
Items Criteria
Offset voltage
Rated Output Voltage
Variation amount
within ±2.5%FS of value
Aug. 201500
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Pressure Sensor/PS-A (ADP5)
0.5
0.020
6.5
0.256
f3.0
f0.118
3.0
0.118
1.8
0.071
R0.2
R0.08
9.5
0.374
7.2Max.
7.0Max.
0.283Max.
0.276Max.
4-R0.7
4-R0.028
2.5
2.5
0.98
0.98
7.0
0.276
7.2
0.283
0.25
0.010
NUGND NU
JAPAN
Vcc
NU
Vout
NU NU
Vcc
NU
GND
Vout
f2.2
f0.087
Pressure
inlet hole
Atmospheric
pressure
inlet hole
VccDC 5V
Vout
123
654
C
GND
7.5
0.295
6-f0.9
6-f0.035
2.52.5
0.980.98
9.5
0.374
1.1
0.043
2.52.5
0.098
0.098
1.9
0.075
Pressure
inlet hole
f2.2
0.5
10.0
0.020
0.394
0.15
0.059
6.5
f3.0
f0.118
3.0
0.256
0.118
0.5
2.52.5
0.20
0.0980.098
1.8
0.071
R0.2
R0.008
0.25
0.01
Atmospheric
pressure
inlet hole
7.2Max.
7.0Max.
4-R0.7
7.0
0.276
7.2
0.283
NUGND NU
Vcc
NU
Vout
NU NU
Vcc
NU
GND
Vout
JAPAN
VccDC 5V
Vout
C
GND
123
654
0.283Max.
0.276Max.
f0.087
4-R0.028
Standard type S Package (Terminal direction : DIP terminal Pressure inlet hole length : 3 mm 0.118 inch)
ADP510
Standard type S Package (Terminal direction : SMD terminal Pressure inlet hole length : 3 mm 0.118 inch)
ADP520
Recommended PC board pattern
Recommended PC board pattern
Terminal connection
diagram
Terminal connection
diagram
Terminal No.
Name
1 Vcc
(Power supply [+])
2 NU (Not usable)
3 Vout (Output)
4 NU (Not usable)
5 NU (Not usable)
6 GND (Ground)
Terminal No.
Name
1 Vcc
(Power supply [+])
2 NU (Not usable)
3 Vout (Output)
4 NU (Not usable)
5 NU (Not usable)
6 GND (Ground)
Dimensions
The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/
unit : mm inch
General tolerance : ±0.3 ±0.012
unit : mm inch
General tolerance : ±0.3 ±0.012
Aug. 201500

ADP51A11

Mfr. #:
Manufacturer:
Panasonic
Description:
Board Mount Pressure Sensors ADP5(PS-A) (DIP) 40 kPa
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union