P1P3800A
http://onsemi.com
5
Table 3. OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
DD
Supply Voltage 3.8 5.5 V
T
A
Operating Temperature −40 +85 °C
C
L
Load Capacitance 15 pF
C
IN
Input Capacitance 7.0 pF
Table 4. ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Rating Unit
V
DD
Voltage on V
DD
pin with respect to Ground −0.5 to +7.0 V
V
IN
Voltage on any input pin with respect to Ground −0.5 to +4.0 V
T
STG
Storage Temperature −65 to +125 °C
T
s
Max. Soldering Temperature (10 sec) 260 °C
T
J
Junction Temperature 150 °C
T
DV
Static Discharge Voltage (As per JEDEC STD22−A114−B) 2.0 kV
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may
affect device reliability.
Table 5. DC ELECTRICAL CHARACTERISTICS
Symbol Parameter Min Typ Max Unit
V
DD
Operating Voltage 3.8 5.0 5.5 V
V
IL
Input Low Voltage (Note 1) GND − 0.3 0.8 V
V
IH
Input High Voltage (Note 1) 1.6 3.0 V
I
IL
Input Low Current 10
mA
I
IH
Input High Current 10
mA
V
OL
Output Low Voltage I
OL
= 8 mA 0.4 V
V
OH
Output High Voltage I
OH
= −8 mA V
DD
− 0.6* V
I
CC
Power Down Current (PD# pulled to GND) 1.0
mA
I
DD
**Dynamic Supply Current,
PD# = 5.5 V; S[1:4] = 5.5 V/GND; CLKIN Swing = 0 to 5.5 V;
V
DD
= 5.5 V
1.8
mA
Dynamic Supply Current,
PD# = 3 V; S[1:4] = 3 V/GND; CLKIN Swing = 0 to 3.0 V
3.0
Dynamic Supply Current,
PD# = 3 V; S[1:4] = 1.6 V; CLKIN Swing = 0 to 1.6 V
4.0
Dynamic Supply Current,
PD# = S[1:4] = 1.6 V; CLKIN Swing = 0 to 1.6 V
5.0
*For V
DD
= 5 V, V
OH
= V
DD
− 0.4 V.
**Indicative value, not a recommended operating condition.
1. Parameter is guaranteed by design and characterization. Not tested in production.
