7-OUTPUT 1.5V PCIE GEN1-2-3 FANOUT BUFFER WITH ZO=100OHMS 16 MARCH 8, 2017
9DBU0741 DATASHEET
Ordering Information
“LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.
“A” is the device revision designator (will not correlate with the datasheet revision).
Revision History
Part / Order Number Shipping Packaging Package Temperature
9DBU0741AKLF Trays 40-pin VFQFPN 0 to +70° C
9DBU0741AKLFT Tape and Reel 40-pin VFQFPN 0 to +70° C
9DBU0741AKILF Trays 40-pin VFQFPN -40 to +85° C
9DBU0741AKILFT Tape and Reel 40-pin VFQFPN -40 to +85° C
Rev. Initiator Issue Date Description Page #
A RDW 7/15/2014 Final update and release - front page and electrical tables. Various
B RDW 9/19/2014
Updated SMBus Input High/Low parameters conditions, MAX values,
and footnotes.
6
C RDW 4/14/2015
1. Updated pin out and pin descriptions to show ePad on package
connected to ground.
2. Minor updates to front page text for family consistency.
3. Updated Clock Input Parameters table to be consistent with PCIe
Vswing parameter.
1-5
D RDW 3/8/2017
1. Updated pin 25 from VDDA1.5 to VDDO1.5 to clearly indicate that
this part has no PLL.
2. Removed "Bypass Mode" reference in "Output Duty Cycle..." and
"Phase Jitter Parameters" tables; update note 3 under Output Duty
Cycle table.
3. Changed VDDA to VDDO1.5 in Current Consumption table.
4. Updated Additive Phase Jitter conditions for PCIe Gen3.
2,3,7,8
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the right to modify the products and/or specifications described herein at any time, without
notice, at IDT’s sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed
in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT's products for any
particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intel-
lectual property rights of IDT or any third parties.
IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably
expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the property of
IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. Integrated Device Technology, Inc.. All rights reserved.
Corporate Headquarters
6024 Silver Creek Valley Road
San Jose, CA 95138 USA
www.idt.com
Sales
1-800-345-7015 or 408-284-8200
Fax: 408-284-2775
www.idt.com/go/sales
Tech Support
www.idt.com/go/support
9DBU0741 MARCH 8, 2017 17 ©2017 Integrated Device Technology, Inc.

9DBU0741AKLF

Mfr. #:
Manufacturer:
IDT
Description:
Clock Buffer 2 O/P 1.5V PCIE 45mW GEN1-2-3 Com 100ohm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet