NX3L4684 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 8 — 3 April 2014 12 of 24
NXP Semiconductors
NX3L4684
Low-ohmic dual single-pole double-throw analog switch
12. Dynamic characteristics
[1] Typical values are measured at T
amb
= 25 C and V
CC
= 1.5 V, 1.8 V, 2.5 V, 3.3 V and 4.3 V respectively.
[2] Break-before-make guaranteed by design.
Table 9. Dynamic characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); for load circuit see Figure 24.
Symbol Parameter Conditions T
amb
= 25 C T
amb
= 40 C to +125 C Unit
Min Typ
[1]
Max Min Max
(85 C)
Max
(125 C)
t
en
enable time nS to nZ or nYn;
see Figure 22
V
CC
= 1.4 V to 1.6 V - 50 100 - 130 130 ns
V
CC
= 1.65 V to 1.95 V - 35 80 - 85 95 ns
V
CC
= 2.3 V to 2.7 V - 24 50 - 55 60 ns
V
CC
= 2.7 V to 3.6 V - 20 45 - 50 55 ns
V
CC
= 3.6 V to 4.3 V - 20 45 - 50 55 ns
t
dis
disable time nS to nZ or nYn;
see Figure 22
V
CC
= 1.4 V to 1.6 V - 30 70 - 80 90 ns
V
CC
= 1.65 V to 1.95 V - 18 55 - 60 65 ns
V
CC
= 2.3 V to 2.7 V - 11 25 - 30 35 ns
V
CC
= 2.7 V to 3.6 V - 9 20 - 25 30 ns
V
CC
= 3.6 V to 4.3 V - 9 20 - 25 30 ns
t
b-m
break-before-make
time
see Figure 23
[2]
V
CC
= 1.4 V to 1.6 V - 20 - 9 - - ns
V
CC
= 1.65 V to 1.95 V - 19 - 7 - - ns
V
CC
= 2.3 V to 2.7 V - 13 - 4 - - ns
V
CC
= 2.7 V to 3.6 V - 10 - 2 - - ns
V
CC
= 3.6 V to 4.3 V - 10 - 1 - - ns
