OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AZ40029

P1-P3P4-P6
Actuator Exposed terminal type L socket type* Socket with cord type*
Push plunger AZ4001 AZ4601 AZ4701
Roller plunger AZ4002 AZ4602 AZ4702
Cross roller plunger AZ4003 AZ4603 AZ4703
Roller arm AZ4004 AZ4604 AZ4704
Adjustable rod AZ4007 AZ4607 AZ4707
Adjustable roller arm AZ4008 AZ4608 AZ4708
PRODUCT TYPE
1. Switch body
High precision micro limit switches with excellent environment proofing
Quickly upgraded to limit switches with lamps by mounting an LED lamp socket
FEATURES
1. Subminiature design
The size of the actual unit is approxi-
mately 1/10 in the case of the plunger
model and approximately 1/6.5 in the
case of the arm model, that of the verti-
cal type limit switch.
Large-scale miniaturization has been
achieved. Ideal for miniaturized machin-
ery designs or highly accurate miniatur-
ized machines.
2. A lamp can be easily added for
operations checks
An exposed terminal type model com-
bined with a socket with cord for the
built-in LED lamp (sold separately) easily
become a limit switch with lamp.
Convenient for maintenance such as
operations checks.
3. With appropriate O.T. range display
The arm model has a convenient appro-
priate O.T. range display for attachment
adjustment work. This should be set so
that the operations display board’s indi-
cated protrusion winds inside the protru-
sion on the axle receptor, permitting use
under optimum conditions.
4. Terminal uses both solder and tab
(#110)
5. O.P. accuracy of ±0.2 (O.P. repeated
accuracy initially ±0.03) achieved
Attachment accuracy improved greatly
The plunger model has achieved a high
O.P. repeated accuracy of within
0.03mm through the development of a
unique switch mechanism and a stan-
dard attachment surface on the upper
surface of the unit (a surface with no
slants.)
Also, through a unique mechanism that
permits adjustment of the O.P. in each
individual product at the time of assem-
bly, an O.P. accuracy of ±0.2mm
.008inch can be safeguarded between
lots, so that almost no operating position
adjustment is required during either
attachment or replacement.
6. A subminiature limit switch with a
great stroke margin (O.T./T.T.)
The T.T. has been enlarged by using a
switching mechanism by coil spring for
QL.
7. Long life
The unit has a long mechanical life of
minimum 10
7
times and a long electrical
life of min. 3 10
5
times (5A, 250V AC
resistance load) by means of a silver
alloy contact with excellent solvent-proof
characteristics and a guaranteed wiping
operation that possesses two hinges and
switching method by coil spring.
8. A mechanism with excellent envi-
ronment proofing
• A protective construction equivalent to
IEC IP64
The actuator has an axle seal with spe-
cial packing, and the main case and ter-
minals have both a waterproof ring and
an epoxy-sealed mechanism. Also, the
entire mechanism is water-proof due to
the optional socket.
Socket with cord type... IP64 equivalent
• A sturdy, shockproof construction
The body uses die-cast zinc, and the
actuator uses stainless steel. Moreover,
shock absorbers have been added to
lessen the shock during plunger release.
TYPICAL APPLICATIONS
Any application where compactness,
density, and robustness, such as sub-
miniaturized machines and plant machin-
ery, is required.
QL exposed
Socket with
LED lamp
QL limit
with lamp
terminal type
LED lamp
Operating display board
Appropriate range
O.T. exceeded
Appropriate range
O.T. exceeded
Insufficient O.T. range
L socket type (roller arm)
Approx. 1/10
Plunger model
QLVertical type
r
Notes) 1. Cadmium free contact types are available on a custom-made basis. Please add an “F” to the end of the part number when ordering.
2. *L socket type or socket with cord type is combination of;
L socket type = Exposed terminal type + L socket, Socket with cord type = Exposed terminal type + Socket with cord type (cord length: 1m)
3. UL recognized, CSA certified type available. When ordering, add suffix 9 to part No..
(For the socket with cord type, only UL recognized type available with suffix 9 to the part No.)
SUBMINIATURE SIZE
LIMIT SWITCHES
QL (AZ4) Micro
Limit Switches
All Rights Reserved © C
OPYRIGHT Panasonic Electric Works Co., Ltd.
Compliance with RoHS Directive
2m 6.562ft.
3m 9.843ft.
5m 16.404ft.
2. Socket
Applicable limit switches Specifications Part No.
Exposed terminal types
L socket AZ3806
Socket with cord (1 m) AZ3807
Socket with cord (2 m) AZ3827
Socket with cord (3 m) AZ3837
Socket with cord (5 m) AZ3857
3. Socket with LED
Applicable limit switches Lamp connection Lamp rating Part No.
Exposed terminal types
Normally open connection
Normally closed connection
6V DC AZ3807162
12V DC AX3807161
24V to 48V DC AZ380716
6V DC AZ3807362
12V DC AZ3807361
24V to 48V DC AZ380736
Notes) 1. Types with 24 to 48V DC lamp rating are recommended for PC input use.
2. The following cord lengths are also available and lot-produced upon request.
Cord length Part No.
AZ38 7
∗
6
∗
AZ38 7
∗
6
∗
AZ38 7
∗
6
∗
Standards Applicable product Part No.
UL recognized product
CSA certified product
File No. : E122222
Ratings : 5A 250V AC
Product type : All products
File No. : LR55880
Ratings : 5A 250V AC
Product type : All products excluding socket with cord types.
Add “9” to the end of the part No.
2
3
5
The 5th digit (boxed) of product code denotes the length of cord.
Numerals come in the asterisked (*) digits, which show the lamp specifications.
The 7th digit: 1: N.O. connection, 3: N.C. connection
The 9th digit: None: 24 to 48V DC, 1: 12V DC, 2: 6V DC
FOREIGN STANDARDS
Rated control voltage 125V AC 250V AC 30V DC 125V DC
5A 5A 5A 0.4A
3A 3A 3A 0.1A
Resistive load (cos
φ
]1)
Inductive load (cos
φ
]0.4)
SPECIFICATIONS
1. Rating
Contact arrangement 1 From C
Initial contact resistance, max. 50 mΩ (By voltage drop 5 to 6V DC 1A)
Contact material Ag alloy (Contains cadmium.)
Initial insulation resistance (At 500V DC) Min. 100MΩ
Initial breakdown voltage
Shock resistance
Between non-consective terminals 1000 Vrms for 1 min
Between dead metal parts and each terminal 1500 Vrms for 1 min
Between ground and each terminal
In the free position
In the full operating position
Vibration resistance
Expected life (min. operations)
Mechanical
Electrical
1500 Vrms for 1 min
10 to 55 Hz, double amplitude of 1.5 mm
10
7
(at 120 cpm)
3 10
5
(at 20 cpm, 5A 250V resistive load)
Max. 300 m/s
2
{Approx. 30G} (Adjustable rod type and adjustable roller
arm type: Min. 100m/s
2
{Approx. 10G}
Ambient temperature –20 to +60°C –4 to +140°F
Ambient humidity Max. 95% R.H.
Max. operating speed 120 cpm
2. Characteristics
Characteristics
Actuator
Operating Force
[O.F.] (N{gf}) max.
Release Force
[R.F.] (N{gf}) min.
Pretravel [P.T.], max.
mm inch
Movement
Differential [M.D.]
max. mm inch
Overtravel [O.T.],
min. mm inch
Totaltravel [T.T.],
min.
6.86 {700}
Push plunger
Roller plunger
Cross roller plunger
Roller arm
Adjustable rod
Adjustable roller arm
0.69 {70} 1 .039 0.15 .006 4 .157 –
6.86 {700 0.69 {70} 1 .039 0.15 .006 4 .157 –
6.86 {700} 0.69 {70} 1 .039 0.15 .006 4 .157 –
4.41 {450} 0.24 {25} 15°±3° 3°–80°
4.41 {450} to 1.11 {113}
0.24 {25} to 0.06 {6} 15°±3° 3°–80°
4.41 {450} to 2.01 {205}
0.24 {25} to 0.11 {11} 15°±3° 3°–80°
3. Operating characteristics
Protective construction
IEC
Switch body
IP64
IP65
IP66
L socket type
–
–
Type with socket
and cord
–
–
4. Protective characteristics
Rated operating voltage Operating voltage range Internal resistance
6V DC 5 to 15V DC 2.4kΩ
12V DC 9 to 28V DC 4.7kΩ
24 to 48V DC 20 to 55V DC 15kΩ
5. LED rating
Note) For the operating characteristics, refer to the TECHNICAL INFORMATION.
Note) For the switch proper, protect its terminals.
QL (AZ4)
All Rights Reserved © C
OPYRIGHT Panasonic Electric Works Co., Ltd.
DATA WIRING DIAGRAMS
1. Life curve
2. Actual load life curve (relay coil load)
700
0
30
200
100
500
400
300
600
12
250 V AC
Resistive load
Applied load
(
A
)
345
Operating rate: 20 cpm
900
→
→
800
1
,
000
No. of operations
(
10
4
)
DIMENSIONS
1. L socket type
Push plunger
(VC20)
Note)
10 0.5
(NK)
500
(HC)
3
(HP)
5
(HG)
Various relay loads
(
VA
)
700
(FC-100)(FC-10)
50
(FC-35)
260
1
,
000
→
→
No. of operations
(
10
4
)
The FC magnetic contactor series is 200 V AC.
The NK is 2 Form C 24 V DC type.
COM
N.O.
QL
1
N.C.
3
2
fastening screw
(
O.P.
)
M3 socket
(
32.5
)
mounting holes
37.2
(
25
)
(
.984
)
.551±.008
14±0.2
(
2.4
)
8
.315
15.6
23
.295
7.5
3.6
1 max.
(
P.T.
)
15.4
28±0.2
2-.177
hexagon nut
head section M8
M12
(
P=1.25
)
13
14.8
steel plunger
1.6
15.6
12.6
stainless
.614
.142
(
.094
)
1.465
.906
17.2±0.2
.039
.677±.008
23.7
2-4.5 dia.
1.102±.008
.933
.606
4.9
.193
14 dia.
.496
.063
.551
8 dia.
.315
.512
.583
.614
(
1.280
)
AZ4601
Weight:
90g
Roller pluger
4.9
(
O.P.
)
fastening screw
M3 socket
25.5±0.2
mounting holes
(
2.4
)
(
25
)
(
32.5
)
(
.984
)
.315
(
.094
)
8
.551±.008
7.5
.295
14±0.2
1.465
.614
15.6
23
.906
3.6
.142
37.2
.193
2-.177
1.102±.008
28±0.2
2-4.5 dia.
13
14.8
.583
.512
.496
12.6
hexagon nut
M12
(
P=1.25
)
head section M8
.614
15.6
.063
1.6
1 max.
(
P.T.
)
.039
23.7
.933
15.4
14 dia.
.551
stainless steel roller
10.53.8 dia.
.413.150 dia.
.606
1.004±.008
(
1.280
)
AZ4602
Weight:
90g
General tolerance: ±0.4 ±.016
Cross roller plunger
4.9
(
O.P.
)
fastening screw
M3 socket
25.5±0.2
mounting holes
(
2.4
)
(
25
)
(
32.5
)
(
.984
)
.315
(
.094
)
8
.551±.008
7.5
.295
14±0.2
1.465
.614
15.6
23
.906
3.6
.142
37.2
.193
2-.177
1.102±.008
28±0.2
2-4.5 dia.
13
14.8
.583
.512
.496
12.6
hexagon nut
M12
(
P=1.25
)
head section M8
.614
15.6
.063
1.6
1 max.
(
P.T.
)
.039
23.7
.933
15.4
14 dia.
.551
stainless steel roller
10.53.8 dia.
.413.150 dia.
.606
1.004±.008
(
1.280
)
AZ4603
Roller arm
AZ4604
Weight:
92.5g
General tolerance: ±0.4 ±.016
(
25–100
)
Adjustable
M4 rod fastening plate screw
4.8
14±0.2
PT 15
°±3°
(
8.5
)
5
(
45.6
)
37.3±1
M12
(
P=1.25
)
M3 socket
8
(
2.4
)
(
32.5
)
257.5
28±0.2
mounting holes
2-.177±.008 dia.
37.5
15.6
23
14.5
3.6
15.6
22.5
.614
.886
(
Between side
fastening screw
head section M8
.906
.984.295
.315
(
.094
)
.142
1.476
.614
.571
2-4.5±0.2 dia.
1.102±.008
Mounting metal
(
1.795
)
1.469±.039
distance 13
)
(
.335
)
23.7
.933
.197
.189
(
.984–3.937
)
length rod
.551±.008
2.6 dia.
.102 dia. stainless rod
Rod fastening plate
M6 mounting
14.8
.583
screw
with hexagonal
holes
(
1.280
)
metal fastening
Presettable at any angle
in the 360° range
()
AZ4607
Weight:
94.5g
Adjustable roller arm
PT 15°±3°
12.53.8 dia.
15°
(
(
25~55
)
Arm fastening plate
(
46.6
)
1.5
)
35.9±1
32.9±1
44.6±1
41.6±1
Adjustable
M4 arm fastening plate screw
M3 socket
(
2.4
)
37.5
15.6
23
14.5
3.6
14.8
15.6
22.5
.614
.583
.886
fastening screw
.906
(
.094
)
.142
1.476
.614
.571
Mounting metal
length rod
.492.150 dia.
stainless steel roller
1.638±.039
1.295±.039
1.413±.039
1.756±.039
(
1.835
)
.059
(
.984~2.165
)
M12
(
P=1.25
)
8
(
32.5
)
257.5
28±0.2
mounting holes
2-.177±.008 dia.
23.7
(
.327
)
16
(
Between side
head section M8
.984.295
.315
(
8.3
)
.933
.630
2-4.5±0.2 dia.
14±0.2
.551±.008
4.8
.189
1.102±.008
distance 13
)
metal fastening
with hexagonal
holes
M6 mounting
screw
(
1.280
)
Presettable at any angle
in the 360° range
AZ4608
Weight:
97g
General tolerance: ±0.4 ±.016
2. Exposed terminal type
Push plunger
mounting holes
2-4.5±0.2 dia.
1 max.
(
P.T.
)
15.4
8.7
23.7
14±0.2
3.6
37.2
(
O.P.
)
28±0.2
23.7
8 dia.
3-quick connecting
15.6
1.6
12.6
terminal
(#
110
)
stainless steel
.063
.496
.315
plunger
14 dia.
.551 dia.
.614
2-.177±.008 dia.
.551±.008
.933
.142
1.465
.343
1.102±.008
17.2±0.2
.677±.008
.039
.933
.606
4.9
.193
AZ4001
3. Socket with cord type
Push plunger
E
(
VCTF
)
0.75 3-wire
Vinyl cabtire cord
White N.O.
Red
Black
8
Approx. 1000
23
14
8±2
20
M3 mounting screw
17.0
14.8
15.6
mounting holes
2-4.5±0.2 dia.
1 max.
(
P.T.
)
15.4
3.6
37.2
(
O.P.
)
28±0.2
8 dia.
1.6
12.6
stainless steel
.063
.496
.315
plunger
14 dia.
.551 dia.
2-.177±.008 dia.
.142
1.465
1.102±.008
17.2±0.2
.677±.008
.039
.606
4.9
.193
COM
N.C.
.614
.583
.669
.787
.315±.079
39.370
23.7
.933
.551
.315
.906
·········
AZ4701
General
tolerance:
±0.4 ±.016
Note) The following types are also available. Roller plunger: AZ4002
Cross roller plunger: AZ4003 Roller arm: AZ4004
Adjustable rod: AZ4007 Adjustable roller arm: AZ4008
(Set with AZ4001 exposed terminal
type and AZ3806 L socket.)
(Set with AZ4002 exposed terminal
type and AZ3806 L socket.)
(Set with AZ4003 exposed terminal
type and AZ3806 L socket.)
(Set with AZ4004 exposed terminal
type and AZ3806 L socket.)
(Set with AZ4007
exposed terminal type and AZ3806 L socket.)
(Set with AZ4008
exposed terminal type and AZ3806 L socket.)
(Set with AZ4001
exposed terminal
type and AZ3807
socket with cord.)
Note) The following types are also available. Roller plunger: AZ4702
Cross roller plunger: AZ4703 Roller arm: AZ4704
Adjustable rod: AZ4707 Adjustable roller arm: AZ4708
Adjustable rod
QL (AZ4)
mm inch
All Rights Reserved © C
OPYRIGHT Panasonic Electric Works Co., Ltd.
P1-P3P4-P6

AZ40029

Mfr. #:
Buy AZ40029
Manufacturer:
Panasonic
Description:
SWITCH SNAP ACTION SPDT 5A 125V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet