OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SI7013-A10-GM

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P43
Si7013
34 Rev. 0.95
Reset Settings = 0000_0000
Register 3. User Register 3
BitD7D6D5D4D3D2D1 D0
Name RSVD Heater [3:0]
Type R/W R/W
Bit Name Function
D3:D0 HEATER[3:0] D3 D2 D1 D0 Heater Current
0000
3.09 mA
0001
9.18 mA
0010
15.24 mA
...
0100
27.39 mA
...
1000
51.69 mA
...
1 1 1 1 94.20 mA
D7,D6,
D5,D4
RSVD Reserved
Si7013
Rev. 0.95 35
7. Pin Descriptions: Si7013 (Top View)
Pin Name Pin # Pin Description
SDA 1 I
2
C data.
AD0/VOUT 2 Dual function pin.
This pin can be switched high or low and is generally used to drive an external
thermistor interface.
On powerup, this pin acts as a device address select pin. Tie high or low to set device
address LSB.
See Figure 5 and Figure 6.
GNDD 3 Digital ground. This pin is connected to ground on the circuit board.
GNDA 4 Analog ground. This pin is connected to ground on the circuit board.
VSNS 5 Voltage Sense Input. Tie to VDD.*
VINP 6 Analog to digital converter positive input.
VINN 7 Analog to digital converter negative input.
VDDA 8 Analog power. This pin is connected to power on the circuit board.
VDDD 9 Digital power. This pin is connected to power on the circuit board.
SCL 10 I
2
C clock
T
GND
Paddle This pad is connected to GND internally. This pad is the main thermal input to the on-
chip temperature sensor. The paddle should be soldered to a floating pad.
*Note: VSNS must be high at power up or device will be held in reset.
SDA
GNDD
VSNS
AD0/VOUT
GNDA
VINP
VDDD
SCL
VINN
VDDA
1
2
3
4
56
7
8
9
10
Si7013
36 Rev. 0.95
8. Ordering Guide
Table 21. Device Ordering Guide
P/N Description Max. Accuracy Pkg Operating
Range (°C)
Protective
Cover
Packing
Format
Temp RH
Si7013-A10-GM Digital temperature/ humidity sensor ±0.4 °C ± 3% DFN 6 –40 to +85 °C N Tube
Si7013-A10-GMR Digital temperature/ humidity sensor ±0.4 °C ± 3% DFN 6 –40 to +85 °C N Tape
& Reel
Si7013-A10-GM1 Digital temperature/ humidity sensor ±0.4 °C ± 3% DFN 6 –40 to +85 °C Y Cut Tape
Si7013-A10-GM1R Digital temperature/ humidity sensor ±0.4 °C ± 3% DFN 6 –40 to +85 °C Y Tape &
Reel
Si7013-A10-IM Digital temperature/ humidity sensor—
industrial temp range
±0.4 °C ± 3% DFN 6 –40 to +125 °C N Tube
Si7013-A10-IMR Digital temperature/ humidity sensor—
industrial temp range
±0.4 °C ± 3% DFN 6 –40 to +125 °C N Tape &
Reel
Si7013-A10-IM1 Digital temperature/ humidity sensor—
industrial temp range
±0.4 °C ± 3% DFN 6 –40 to +125 °C Y Cut Tape
Si7013-A10-IM1R Digital temperature/ humidity sensor—
industrial temp range
±0.4 °C ± 3% DFN 6 –40 to +125 °C Y Tape &
Reel
Si7013-A10-YM Digital temperature/ humidity sensor—
automotive
±0.4 °C ± 3% DFN 6 –40 to +125 °C N Tube
Si7013-A10-YMR Digital temperature/ humidity sensor—
automotive
±0.4 °C ± 3% DFN 6 –40 to +125 °C N Tape &
Reel
Si7013-A10-YM1 Digital temperature/ humidity sensor—
automotive
±0.4 °C ± 3% DFN 6 –40 to +125 °C Y Cut Tape
Si7013-A10-YM1R Digital temperature/ humidity sensor—
automotive
±0.4 °C ± 3% DFN 6 –40 to +125 °C Y Tape
& Reel
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P43

SI7013-A10-GM

Mfr. #:
Buy SI7013-A10-GM
Manufacturer:
Silicon Labs
Description:
Board Mount Humidity Sensors Digital RH (+/-2%) & 2-Zone temp senso
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet