11
2017.4
③
Subminiature Coaxial Switch 0.85mm High, DC to 11GHz
MS-180 Series
●PCB occupation
MS-156C MS-180
●Height
2.3
2.3
1.35
0.85
1.8
1.8
●Weight
0.016g
0.007g
38.7% smaller
37% lower
56.3% lighter
Space saving design
0.85mm above the board
1.8×1.8mm on the board
■Features
1. Performs over a wide frequency range
Applicable frequencies range over a wide
bandwidth, from DC to 11GHz.
2. Low insertion loss
0.1 dB Max. up to 3GHz (not mated with the probe).
0.2 dB Max. up to 6GHz (not mated with the probe).
0.3 dB Max. up to 11GHz (not mated with the probe).
3. Space-saving and low profile design
0.85mm high above the board.
1.8mm x 1.8mm board space occupation.
4.
Minimized Keep Out area and inspection
port on chassis
Thanks to thinner probing tip in 2.24mm outer
diameter, customer are able to achieve better space
saving design.
5. Automatic board placement
Packaged on tape-and-reel the receptacles can be
placed with vacuum nozzles of the automatic
placement equipment.
6. Beryllium Free, Halogen Free
Chlorine, and Bromine are not used in the receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500
ppm max.
■Overview
MS-180 series is the subminiature coaxial
connectors with switch, developed for inspecting the
RF module functionality and high frequency circuits.
It can be used to mount on high density board of
miniaturized devices and multiband frequency. It
supports high frequency bands up to 11GHz.
Enable secure and easy inspection of circuits.
Verification of the circuit performance is
accomplished by simply inserting the external plug
in the board mounted receptacle. This action
re-directs the circuit from normal condition to the
plug side. Removing the plug restores circuit to its
normal condition.
Plug side is smaller than the previous model and
occupies less space in customer’s design.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.