MS180LH3-HRMJ-040V300A Datasheet MS180LH3-HRMJ-040V300A | P7-P8

MS-180 Series●Subminiature Coaxial Switch 0.85mm High, DC to 11GHz

●Probe with simple lock (for lab use)

MS-180-040LP-H3

MS-180-088LP-H1

●Probe with complete Lock (for lab use)

• This probe has simple lock mechanism to keep

the probe connect with the receptacle without

foreign assistance.

However the following must be ensured : the

probe must be vertical to the receptacle / the

cable on the probe cannot be pulled.

• This durability only applies to this specific probe.

• This product is sold as a complete assembly

(probe with cable) ; please make your selection

from the product shown on the right.

Customization is available for cable lengths and

the connection to the measurement equipment

side. please contact your local Hirose Sales

Representative.

• This probe has locking feature to stay engaged

with MS-180 once it is mated. it has to be

vertical to maintain the engagement.

• This durability only applies to this specific probe.

• This product is sold as a complete assembly

(probe with cable) ; please make your selection

from the product shown on the right.

Customization is available for cable lengths and

the connection to the measurement equipment

sied. please contact your local Hirose Sales

Representative.

Part No. HRS No. Durability

MS-180-040LP-H3

358-0319-4 500 cycles

Part No. HRS No. Durability

MS180LH3-HRMJ-040V100

362-0224-9 01 500 cycles

Part No. HRS No. Durability

MS-180-088LP-H1

358-0269-8 500 cycles

Part No. HRS No. Durability

MS180LH1-HRMJ-088V100

362-0223-6 01 500 cycles

4.8

5.3

14.32

Ø3.6

Ø2.4

1.3

6.12

1/4-36UNS-2A

100

Ø2.5

5.84.27

Ø2.3

Ø8.4

6.2

1.1

22.1

1/4-36UNS-2A

100

MS-180 Series●Subminiature Coaxial Switch 0.85mm High, DC to 11GHz

BPrecautions

1. Do not use the washing process.

2. This product is intended to be used for circuit inspection only. Consult us if any other application is considered.

3. Do not use lab use probe for mass production line.

4. Do not use hand soldering for mounting of MS-180, since it could result in solder and flux wicking to the

contact areas.

5. When using a heat gun, hot plate, or similar methods for mounting receptacle on PCB, limit the temperature to

260°C apply for 10 seconds max.

6. Do not reflow the product other than using specified PCB footprint and metal stencil dimensions.

Otherwise it may cause solder and/or flux wicking affecting the product performance.

7. Avoid using the product in dusty, mixed gases and any other environment which is outside of the specified

range in spec sheet.

8. Do not allow any particles to enter the board mounted receptacle when cutting PCB.

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 04/2017. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL:

81-45-620-3526 Fax:

81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

• For measurement RF Performance of

MS-180 probe.

• For erectrical calibration at probe mating face.

Part No. HRS No. Durability

MS-180LR-HRMJ-1 358-0304-7 500 cycles

1/4-36UNS-2A

Ø1.2

12.3

4.58 7.4

20.7

11.9

Ø8

■SMA conversion adapter for probe

P1-P3 P4-P6 P7-P8

MS180LH3-HRMJ-040V300A

Mfr. #:

Buy MS180LH3-HRMJ-040V300A

Manufacturer:

Hirose Electric

Description:

Coaxial Switches MS180 Plug Cable Assembly

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

MS180LH3-HRMJ-040V300A