8
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6141.1
August 5, 2015
Submit Document Feedback
ISL88016, ISL88017
TSOT Package Family
e1
N
A
D
E
4
(N/2)21
E1
0.15 DC
2X
0.25 C
2X N/2 TIPS
e
B
ddd
M
DC A-B
b
NX
6
2 3
5
SEATING
PLANE
0.10 C
NX
1 3
C
D
0.15 A-BC
2X
A2
A1
H
c
(L1)
L
0.25
4° ±4°
GAUGE
PLANE
A
MDP0049
TSOT PACKAGE FAMILY
SYMBOL
MILLIMETERS
TOLERANCETSOT5 TSOT6 TSOT8
A 1.00 1.00 1.00 Max
A1 0.05 0.05 0.05 ±0.05
A2 0.87 0.87 0.87 ±0.03
b 0.38 0.38 0.29 ±0.07
c 0.127 0.127 0.127 +0.07/-0.007
D 2.90 2.90 2.90 Basic
E 2.80 2.80 2.80 Basic
E1 1.60 1.60 1.60 Basic
e 0.95 0.95 0.65 Basic
e1 1.90 1.90 1.95 Basic
L 0.40 0.40 0.40 ±0.10
L1 0.60 0.60 0.60 Reference
ddd 0.20 0.20 0.13 -
N 5 6 8 Reference
Rev. B 2/07
NOTES:
1. Plastic or metal protrusions of 0.15mm maximum per side are
not included.
2. Plastic interlead protrusions of 0.15mm maximum per side are
not included.
3. This dimension is measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
5. Index area - Pin #1 I.D. will be located within the indicated zone
(TSOT6 AND TSOT8 only).
6. TSOT5 version has no center lead (shown as a dashed line).
