PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
PRODUCT SPECIFICATION
SINGLE ROW – STACKABLE
LINEAR (SL) CONNECTOR SYSTEM
SHEET No.
N
EC No:
UCP2013-1367
10 of 10
DATE:
2012/10/15
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
MMSTROH MKIPPER FSMITH
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
Temperature Rise
and
Cold Resistance
Temperature Rise: Mate the
connectors; and measure the
temperature rise at the rated current
after 45 minutes.
Cold Resistance: Place mated
connectors in an air circulating
chamber exposed to a temperature of
-40°C for 120 hours
Temperature Rise: 30°C
above ambient maximum
Temperature Rise: 30°C
above ambient maximum
Solderability
Molex SMES-152
Steam age 1 hr. Solder time 5 ± 0.5
seconds. Solder temperature: 245 ±
5°C
95% of the immersed area
must show no voids, pin
holes
Flowing Mixed Gas
(FMG)
Battelle Class II, 10 ppm
2
H
2
S, 100 ppm NO
2
, 70 ± 1% R.H., 25
deg. C.
50-60 CFM. 10 days mated and 7
Contact Resistance:
10 milliohms Maximum
change from Initial
Resistance to Solder
Heats
Solder Time 3 ± 0.5 seconds
Solder Temperature: 260 ± 5°C
Immerse leads to a depth of 1.57mm
(.062 in.) from connector body.
Appearance: No damage
or discoloration of
connector materials.
6.0 PACKAGING:
Parts are packaged in trays, tubes or bulk packed, refer to appropriate Sales Drawing for specific
information.
7.0 QUALITY ASSURANCE PROVISIONS:
7.1 MATERIAL INSPECTION:
Shall consist of certification supported by verifying data.
7.2 ACCEPTANCE INSPECTION:
Acceptance of ongoing production product shall be determined by inspection according to
Molex approved quality plans and required PPM levels for critical characteristics.
7.3 CONFORMANCE TESTING:
Shall be performed on production quality manufactured products.
