PRODUCT SPECIFICATION
REVISION: ECR/ECN INFORMATION: TITLE:
PRODUCT SPECIFICATION
SINGLE ROW – STACKABLE
LINEAR (SL) CONNECTOR SYSTEM
SHEET No.
N
EC No:
UCP2013-1367
5 of 10
DATE:
2012/10/15
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
MMSTROH MKIPPER FSMITH
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
5.0 PERFORMANCE:
Note: For Specifications of individual Terminals and un-mated Headers please see their
respective Product Specs:
PS-70021 – Male, crimp terminal
PS-70058 – Female box, crimp terminal
PS-71851 – Female box, high force crimp terminal
PS-70541 – Vertical and Right Angle Headers
PS-70495 – Compliant Header
5.1 ELECTRICAL PERFORMANCE:
Contact Resistance
(Low Level)
Mate Connectors with a maximum
voltage of 20mV and a current of 100
mA.
30 milliohm Maximum
Initial
Insulation
Resistance
Mate Connectors with a voltage of 500
VDC between adjacent terminals and
between terminals and ground.
10000 Megohms Minimum
Dielectric
Withstanding
Voltage
Mate Connectors with a voltage of
1500 VAC for 1 minute between
adjacent terminals and between
terminals and ground.
Or
Mate Connector
VDC for 1 minute between adjacent
terminals
No breakdown
Voltage Drop
Mate Connectors with a current of 3
amps and the open circuit voltage set
to not exceed 15 VDC. Power is
applied for a minimum of 30 seconds
before the first measurement
30 millivolt Maximum
Initial
Voltage Drop after
Vibration
Subject mated connectors to a total of
8 hours of simple harmonic motions.
(Apply 4 hours in the Z axis and 2
hours in each of the X and Y axes).
Vary the frequency uniformly from 10
Hz to 50 Hz traversed continuously in
8 minutes
30 millivolt Maximum
Initial
&
60 millivolt Maximum
After Endurance Exposure