8533-01 Data Sheet
©2016 Integrated Device Technology, Inc Revision F January 19, 201616
REVISION HISTORY SHEET
Rev Table Page Description of Change Date
B
4C
4D
5
4
5
5
V
PP
values changed from 0.1 Min. to 0.15 Min.
V
CMR
values changed from 0.13 Min., 1.3 Max. to 1.5 Min, V
CC
Max.
Deleted V
IH
and V
IL
rows.
t
R
values changed from 100 Min. to 300 Min, and added 700 Max.
t
F
values changed from 100 Min., 600 Max. to 300 Min. to 700 Max.
For t
R
and t
F
rows changed test conditions from 30% to 70% to 20% to 80%.
tjit(cc) values changed 150 Max. to 0 Max.
5/22/01
B
55
Deleted t
S
and t
H
rows. 6/4/01
B
4D 5
V
PP
values changed from 0.15 Min., 1.3 Max. to 0.3 Min., 1 Max.
V
CMR
values changed from 1.5 Min., to V
EE
+ 1.5 Min.
6/28/01
C
4B
5
4
5
V
IH
values changed from 3.765 Max. to V
CC
+ 0.3 Max.
Deleted tjit(cc) row.
10/15/01
C
6, 7
Revised Parameter Measurement diagrams. 10/18/01
C
3
Updated Figure 1, CLK_EN Timing Diagram. 11/1/01
C
8
Added Termination for LVPECL Outputs section. 5/28/02
C
6
Output Load Test Circuit diagram - corrected VEE equation to read,
V
EE
= -1.3V ± 0.165V from V
EE
= -1.3V ± 0.135V.
10/03/02
D
T2
T4D
T5
1
2
4
5
5
6
8
9
10
Added RMS Jitter to Features section.
Pin Characteristics Table - changed C
IN
4pF max. to 4pF typical.
Changed Outputs Absolute Maximum Rating.
LVPECL Table - changed VSWING 0.85V max. to 1.0V max.
AC Characteristics Table - added RMS jitter.
Added Additive Phase Jitter Section.
Updated LVPECL Output Termination diagrams.
Added Differential Clock Input Interface.
Added LVPECL Clock Input Interface.
Updated format throughout data sheet.
10/12/03
D
T9 15
Added Lead Free Annealed part number to Ordering Information table. 2/9/04
D
T9
10
15
Updated LVPECL Clock Input Interface section.
Ordering Information Table - added Lead Free part number.
6/17/04
E
T4D
T9
5
11 - 12
15
LVPECL DC Characteristics Table -corrected V
OH
max. from V
CC
- 1.0V to
V
CC
- 0.9V.
Power Considerations - corrected power dissipation to refl ect V
OH
max in Table
4D.
Ordering Information Table - added lead-free note.
4/12/07
FT9 15
17
Updated datasheet’s header/footer with IDT from ICS.
Removed ICS prefi x from Part/Order Number column.
Added Contact Page.
8/4/10
F
T9 15
Removed ICS from part numbers where needed.
Ordering Information - removed quantity in tape and reel. Deleted LF note below
table.
Updated header and footer
1/19/16