OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TEN 40-2411WI

P1-P3P4-P4
http://www.tracopower.com
Features
◆ High power density: 40W in
2”x2”x0.4” metal package
◆ Ultra wide 4:1 input voltage range
◆ Very high efficiency up to 87 %
◆ No minimum load required for
single output models
◆ Over temperature protection
◆ Under voltage lockout
◆ Remote On/Off
◆ Shielded metal case with insulated
baseplate
◆ Optional heat-sink
◆ 3-year product warranty
DC/DC Converters
TEN 40WI Series, 40 Watt
The TEN 40WI series is a family of high performance 40W dc-dc converter modules
featuring ultra wide 4:1 input voltage ranges in a compact low profile case with
industry-standard footprint. A very high efficiency allows an operating temperature
range of –40°C to 85°C. Further standard features include remote On/Off, output
voltage trimming, over voltage protection, under voltage lockout, over temperature
and short circuit protection.
Typical applications for these products are battery operated equipment and distrib-
uted power architectures in communication and industrial electronics, everywhere
where isolated, tightly regulated voltages are required and space is limited on the
PCB.
Page 1 of 4
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEN 40-2410WI
3.3 VDC 10.0 A 86 %
TEN 40-2411WI
5.0 VDC 8.0 A 87 %
TEN 40-2412WI 9 – 36 VDC
12 VDC 3.35 A 87 %
TEN 40-2413WI
(24 VDC nominal)
15 VDC 2.65 A 87 %
TEN 40-2422WI
±12 VDC ±1.65 A 86 %
TEN 40-2423WI
±15 VDC ±1.35 A 86 %
TEN 40-4810WI
3.3 VDC 10.0 A 86 %
TEN 40-4811WI
5.0 VDC 8.0 A 88 %
TEN 40-4812WI 18 – 75 VDC
12 VDC 3.35 A 87 %
TEN 40-4813WI
(48 VDC nominal)
15 VDC 2.65 A 87 %
TEN 40-4822WI
±12 VDC ±1.65 A 86 %
TEN 40-4823WI
±15 VDC ±1.35 A 86 %
Models
UL 60950-1
http://www.tracopower.com
Input Specifications
Input current (no load) 24 Vin single output models: 100 mA typ
48 Vin single output models: 60 mA typ
. dual putput models: 30 mA typ
Input current (full load) (nominal input 24/48 VDC) 3.3 VDC models: 1680 / 840 mA typ.
other models: 2000 / 1000 mA typ.
Input voltage variation (dv/dt) 5 V/ms, max.
(complies with ETS300 132 part 4.4)
Start-up voltage / under voltage lockout 24 Vin models: 9 VDC / 8 VDC (typ.)
48 Vin models: 18 VDC / 16 VDC (typ.)
Surge voltage (100 msec. max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
EMC characteristics (with external capacitors) see application note: www.tracopower.com/overview/ten40wi
– Conducted noise EN 55022 level A, FCC part 15, level A
– ESD EN 61000-4-2, air: ±8 KV contact: ±6 KV,
perf. criteria A
– Fast transient EN 61000-4-4, ±2 KV, perf. criteria B
– Surge EN 61000-4-5, ±1 KV, perf. criteria A
Output Specifications
Voltage set accuracy (at nominal input and full load) ±1 %
Output voltage adjustment ±10 % (see application note)
Regulation – Input variation Vin min. to Vin max. 0.2 % max.
– Load variation single output models: 0.5 % max. (0 – 100 % load)
dual output models balanced load: 1.0 % max. (4 – 100 % load)
– Load cross variation 25 % / 100 % 5 % max.
Temperature coefficient 0.02 %/K max.
Ripple and noise (20 MHz Bandwidth) 3.3 VDC & 5 VDC output models: 50 mVpk-pk max.
dual outputs: 150 mVpk-pk max.
all other outputs: 75 mVpk-pk max.
Start up time (nominal Vin and constant resistive load) 25 ms typ.
Transient response time (25 % load change) 250 µs typ.
Short circuit protection indefinite (automatic recovery)
Over load protection 150 % of Iout max. typ. foldback
Thermal shutdown @ +110°C typ.
Over voltage protection 3.3 VDC models: 3.9 V
5 VDC models 6.2 V
12/±12 DC m odels: 15 /±15 V
15 VDC output: 18 /±18 V
Minimum load single output model: not required.
dual output models: 1 % of rated max current
(operation at lower load
condition will not damage these converters, however,
they may not meet all listed specifications)
Capacitive load output models 3.3 VDC models: 25’000 µF max.
5.0 VDC models: 13’000 µF max.
12 VDC models: 2’300 µF max.
15 VDC models: 1’500 µF max.
±12 VDC models: 1’200 µF max. (each output)
±15 VDC models: 750 µF max. (each output)
DC/DC Converters
TEN 40WI 40 Watt
Page 2 of 4
http://www.tracopower.com
DC/DC Converters
TEN 40WI 40 Watt
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Case temperature +105°C max.
– Storage –55°C to +125°C
Derating see application note
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >660’000 h
Isolation voltage (60 sec.) – Input / Output 1‘500 VDC
Isolation resistance – Input / Output >1‘000 M Ohm
Isolation capacitance – Input / Output 2500 pF max.
Remote On/Off – On: 3.0 ... 12 VDC or open circuit.
– Off: 0 ... 1.2 VDC or short circuit pin 3 and pin 2
– Off idle current: 2.5 mA max.
Switching frequency (fixed) 300 kHz typ. (Pulse width modulation PWM)
Vibration 10 – 55 Hz, 10G, 30 minutes along X,Y,Z
Safety standards UL 60950-1, IEC/EN 60950-1
Safety approvals – Certification documents www.tracopower.com/overview/ten40wi
Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf
– RoHs RoHS Directive 2011/65/EU
Physical Specifications
Casing material copper, nickel plated
Baseplate material none conductive FR4
Potting material epoxy (UL 94V-0 -rated)
Weight 60 g (2.1 oz )
Soldering temperature max. 265°C / 10 sec.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Page 3 of 4
Supporting documents: www.tracopower.com/overview/ten40wi
P1-P3P4-P4

TEN 40-2411WI

Mfr. #:
Buy TEN 40-2411WI
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet