Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Outline Dimensions
Rev. July 11, 2018
Dimensions in [mm], () = Inch
Pin diameter: 1.0 ±0.05 (0.04 ±0.002)
Pin pitch tolerances: ±0.35 (± 0.014)
Case tolerances: ±0.5 (±0.02)
Note:
The product label on converter has to be removed before
mounting the heat-sink.
For volume orders converters will be supplied with heat-
sinks already mounted. Please contact factory for quota-
tion.
Page 4 of 4
DC/DC Converters
TEN 40WI 40 Watt
56.0
(2.2)
max.
25.2 (0.1)
17.0 (0.67)
max.
Converter
Heat-sink
Thermal pad
Clamp
Order code: TEN-HS3
(cont.: heat-sink, thermal pad, 2 clamps)
Material: Aluminum
Finish: Anodic treatment (black)
Weight: 22 g (0.78oz) (without converter)
Thermal impedance after assembling: 7.6 K/W
Pin Single Dual
1
+Vin (Vcc) +Vin (Vcc)
2
–Vin (GND) –Vin (GND)
3
Remote On/Off
4
– Sense* + Vout
5
+ Sense* Common
6
+ Vout Common
7
– Vout – Vout
8
Trim
Pin-Out
5.6
10.2
50.8
5.08
27.9
50.8
7
6
5
1
2
3
8
Bottom
view
45.72
(2.0)
(0.22)
(2.0)
(0.2)
(0.3)
(1.10)
(1.8)
5.08
(0.2)
4
10.16
(0.4)
7.62 7.625.08
(0.2)(0.3)
5.08 (0.2)
*Sense line to be connected to the output
either at the module or at the load under
regard of polarity.
Heat-Sink (Option)
