OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AFCT-5943LZ

P1-P3P4-P6P7-P9P10-P12P13-P15
13
Transmitter Electrical Characteristics
AFCT-5943LZ : Tc = 0°C to +70°C, V
CC
= 3.1 V to 3.5 V)
AFCT-5943ALZ: Tc = -40°C to +85°C, V
CC
= 3.1 V to 3.5 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Supply Current I
CCT
75 175 mA
Power Dissipation P
DIST
0.25 0.61 W
Data Input Voltage Swing (single-ended) V
IH
- V
IL
150 1200 mV
Transmitter Dierential
Data Input Current - Low I
IL
-350 -2 µA
Transmitter Dierential
Data Input Current - High I
IH
18 350 µA
Parameter Symbol Min. Typ. Max. Unit Reference
Supply Current I
CCR
85 140 mA 1
Power Dissipation P
DISR
0.28 0.49 W 2
Data Output Voltage Swing (single-ended) V
OH
- V
OL
575 930 mV 3
Data Output Rise Time t
r
30 150 ps 4
Data Output Fall Time t
f
30 150 ps 4
Signal Detect Output Voltage - Low V
OL
0.8 V 5
Signal Detect Output Voltage - High V
OH
2.0 V 5
Signal Detect Assert Time (OFF to ON) AS
MAX
100 µs
Signal Detect Deassert Time (ON to OFF) ANS
MAX
100 µs
Notes:
1. Includes current for biasing Rx data outputs.
2. Power dissipation value is the power dissipated in the receiver itself. It is calculated as the sum of the products of V
CC
and I
CC
minus the sum of
the products of the output voltages and currents.
3. These outputs are compatible with 10 k, 10 kH, and 100 k ECL and PECL inputs.
4. These are 20 - 80% values.
5. SD is LVTTL compatible.
Receiver Electrical Characteristics
AFCT-5943LZ: Tc = 0°C to +70°C, V
CC
= 3.1 V to 3.5 V)
AFCT-5943ALZ: Tc = -40°C to +85°C, V
CC
= 3.1 V to 3.5 V)
14
Transmitter Optical Characteristics
AFCT-5943LZ: Tc = 0°C to +70°C, V
CC
= 3.1 V to 3.5 V)
AFCT-5943ALZ: Tc = -40°C to +85°C, V
CC
= 3.1 V to 3.5 V)
Parameter Symbol Min. Typ. Max. Unit Reference
Output Optical Power 9 µm SMF P
OUT
-10 -6 -3 dBm 1
Center Wavelength
l
C
1260 1360 nm
Spectral Width - rms s 1 4 nm rms 2
Optical Rise Time t
r
40 100 ps 3
Optical Fall Time t
f
80 225 ps 3
Extinction Ratio E
R
8.2 12 dB
Output Optical Eye Compliant with eye mask Telcordia GR-253-GORE
Back Reection Sensitivity -8.5 dB 4
Jitter Generation
pk to pk 70 mUI 5
RMS 7 mUI 5
Parameter Symbol Min. Typ. Max. Unit Reference
Receiver Sensitivity P
IN
MIN -21.5 -19 dBm avg. 6
Receiver Overload P
IN
MAX -3 +1 dBm avg. 6
Input Operating Wavelength
l
1260 1570 nm
Signal Detect - Asserted P
A
-24 -19.5 dBm avg.
Signal Detect - Deasserted P
D
-35 -26.4 dBm avg.
Signal Detect - Hysteresis P
H
0.5 2.4 4 dB
Reectance -35 -27 dB
Notes:
1. The output power is coupled into a 1 m single-mode ber. Minimum output optical level is at end of life.
2. The relationship between FWHM and RMS values for spectral width can be derived from the assumption of a Gaussian shaped spectrum which
results in RMS = FWHM/2.35.
3. These are unltered 20 - 80% values.
4. This meets the “desired” requirement in SONET specication (GR253). The gure given is the allowable mismatch for 1 dB degradation in receiver
sensitivity.
5. For the jitter measurements, the device was driven with SONET OC-48C data pattern lled with a 2
23
-1 PRBS payload.
6. P
IN
represents the typical optical input sensitivity of the receiver. Minimum sensitivity (P
IN
MIN) and saturation (P
IN
MAX) levels for a 2
23
-1 PRBS with
72 ones and 72 zeros inserted. Over the range the receiver is guaranteed to provide output data with a Bit Error Rate better than or equal to
1 x 10
-10
. For multirate applications the sensitivity will meet the maximum SONET specication for OC48 across all datarates (-19 dBm).
Receiver Optical Characteristics
AFCT-5943LZ: Tc = 0°C to +70°C, V
CC
= 3.1 V to 3.5 V)
AFCT-5943ALZ: Tc = -40°C to +85°C, V
CC
= 3.1 V to 3.5 V)
Class 1 Laser Product:
This product conforms to the applicable requirements
of 21 CFR 1040 at the date of manufacture
Date of Manufacture:
Avago Technologies Inc., No 1 Yishun Ave 7, Singapore
Handling Precautions
1. The AFCT-5943xxZ can be damaged by current surges
or overvoltage. Power supply transient precautions
should be taken.
2. Normal handling precautions for electrostatic sensi-
tive devices should be taken.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2014 Avago Technologies. All rights reserved. Obsoletes AV01-0628EN
AV02-0178EN - February 28, 2014
Ordering Information
1300 nm FP Laser (Temperature range 0°C to +70°C)
AFCT-5943LZ
1300 nm FP Laser (Temperature range -40°C to +85°C)
AFCT-5943ALZ
P1-P3P4-P6P7-P9P10-P12P13-P15

AFCT-5943LZ

Mfr. #:
Buy AFCT-5943LZ
Manufacturer:
Description:
Fiber Optic Transmitters, Receivers, Transceivers Transceive
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet