1.187
[30.15]
1.445
[36.70]
3.310
[84.06]
2X
1/4-28
1.187
[30.15]
4.754
[120.76]
FLATWASHER
LOCKWASHER
2 NUTS
1/4-28
CONFIGURATIONS.
WHEN USED. CON-
SULT FACTORY FOR
LIARY SWITCH(ES)
AND / OR AUXI-
METERING SHUNT
CONNECTORS TO
ELECTRICAL
1.266
2.406
[61.11]
2.741
[69.62]
Relay Trip
This permits the overload sensing coil to be
placed in a circuit which is electrically isolated
from the trip contacts. The coil may be actuated
by sensors monitoring pressure, flow,
temperature, speed, etc. Other typical
applications include crowbar, interlock and
emergency rapid shut down circuitry. Trip may
be accomplished by voltage or current, which
must be removed after trip.
Shunt Trip
The shunt trip is designed for controlling two
separate loads with one assembly. The control
is established by providing overload protection
for the critical load. When the current through
this load becomes excessive and reaches the
trip point, the protector will open and remove
power from both loads simultaneously. The total
current rating of both loads must not exceed the
maximum contact rating.
Relay Trip
Shunt Trip
Metering Shunt
METERING SHUNT/AUXILIARY SWITCH CONNECTORS
Description MOLEX AMP
Pin (Male) 02-09-2103 770147-1
Socket (Female) 02-09-1104 770146-1
JAE Series - Congurations
JAE (F-frame)
212