Soldering instructions
Soldering
Components with wire leads such as leaded transient voltage/ RFI suppressors (SHCVs) can be
soldered using all conventional methods.
Recommended temperature profile in wave soldering
Storage
The SHCV type series should be soldered after shipment from EPCOS within the time specified:
24 months.
The parts are to be left in the original packing to avoid any soldering problems caused by oxidized
terminals. Storage temperature – 25 to 45 °C.
Max. relative humidity (without condensation): < 75% annual average,
< 95% on max. 30 days per annum.
Standards
IEC 60068-2-20
Leaded transient voltage/RFI suppressors (SHCVs)
SHCV series
Page 7 of 22Please read Cautions and warnings and
Important notes at the end of this document.
