2
Absolute Maximum Ratings at T
A
= 25°C
Parameter Red Yellow Green Units
Peak Forward Current 90 60 90 mA
Average Forward Current
[1]
25 20 25 mA
DC Current
[2]
30 20 30 mA
Power Dissipation
[3]
135 85 135 mW
Reverse Voltage (I
R
= 100 µA) 5 5 5 V
Transient Forward Current
[4]
(10 µsec Pulse) 500 500 500 mA
LED Junction Temperature 110 110 110 °C
Operating Temperature Range -40 to +100 -40 to +100 -20 to +100 °C
Storage Temperature Range -40 to +100 -40 to +100 -40 to +100
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at 1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die
and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute
Maximum Ratings.
Part Numbering System
HLMP - 1 x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
A1: Right Angle Housing, Uneven Leads
A2: Right Angle Housing, Even Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Lens Options
20: Untinted or Microtinted, Non-diused
21: Tinted, Non-diused
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
1: T-1 (3 mm)