XCR3384XL: 384 Macrocell CPLD
DS024 (v2.0) March 31, 2006 www.xilinx.com 13
Product Specification
R
Warranty Disclaimer
THESE PRODUCTS ARE SUBJECT TO THE TERMS OF THE XILINX LIMITED WARRANTY WHICH CAN BE VIEWED
AT http://www.xilinx.com/warranty.htm
. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY USE OF THE
PRODUCTS IN AN APPLICATION OR ENVIRONMENT THAT IS NOT WITHIN THE SPECIFICATIONS STATED ON THE
THEN-CURRENT XILINX DATA SHEET FOR THE PRODUCTS. PRODUCTS ARE NOT DESIGNED TO BE FAIL-SAFE
AND ARE NOT WARRANTED FOR USE IN APPLICATIONS THAT POSE A RISK OF PHYSICAL HARM OR LOSS OF
LIFE. USE OF PRODUCTS IN SUCH APPLICATIONS IS FULLY AT THE RISK OF CUSTOMER SUBJECT TO
APPLICABLE LAWS AND REGULATIONS.
Additional Information
CoolRunner XPLA3 Data Sheets and Application Notes
Device Package User Guide
Device Packages
Revision History
The following table shows the revision history for this document
XCR3384XL-12FT256I 12 ns FT256 256-ball Fine-Pitch BGA (FT) I
XCR3384XL-12FG324I 12 ns FG324 324-ball Fineline BGA Package (FG) I
Notes:
1. C = Commercial: T
A
= 0° to +70°C; I = Industrial: T
A
= –40° to +85°C
Device Ordering and
Part Marking Number
Speed
(pin-to-pin
delay)
Pkg.
Symbol
No. of
Pins Package Type
Operating
Range
(1)
Date Version Revision
02/08/01 1.0 Initial Xilinx release.
04/11/01 1.1 Update TSUF spec to meet UMC characterization data. Added Typical I/V curve, Figure 2;
added Table 2: Total User I/O; changed V
OH
spec. Added 324-ball Fineline BGA pinouts
and package.
04/19/01 1.2 Updated Typical I/V curve, Figure 2: added voltage levels.
08/10/01 1.3 Updated AC Electrical Characteristics; Internal Timing Parameters; added TQ144 package
and pinouts.
01/08/02 1.4 Updated T
SUF
spec to match software timing. Added single p-term setup time (T
SU1
) to AC
Table, renamed T
SU
to T
SU2
for setup time through the OR array. Updated T
INIT
spec and
T
CONFIG
spec. Updated T
HI
spec to correct a typo. Updated AC Load Circuit diagram to
more closely resemble true test conditions, added note for T
POD
delay measurement.
Changed TQ144 pinout for pins 34 and 35.
01/06/03 1.5 Changed to Preliminary, updated AC and DC specs per characterization review. Updated
Note 5 on AC Specifications from 10 mA to 13 mA at 3.6V. Updated T
PCO
(added T
PTCK
).
Updated Ordering Information format.
07/15/03 1.6 Updated test conditions for I
IL
and I
IH
.
08/21/03 1.7 Updated Package Device Marking Pin 1 orientation.
02/13/04 1.8 Add solder temperature specification. Add links to application notes, data sheets, and
packages.
04/08/05 1.9 Added I
CCSB
Typical and T
APRPW
specifications. Removed T
SOL
specification.
03/31/06 2.0 Added Warranty Disclaimer; Added Pb-Free ordering information.
