TE CONNECTIVITY, SWINDON, UK
While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this specification, TE Connectivity does not guarantee that it is
error-free, nor does TE Connectivity make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE Connectivity
reserves the right to make any adjustments to the information contained herein at any time without notice. TE Connectivity expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in
this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE Connectivity for
the latest dimensions and design specifications.
If this document is printed it becomes uncontrolled.
Gordon White and
Steve Rowland
This specification sheet, when used with RW-2500, defines the product characteristics and
performance of TE Connectivity High Temperature Heat Shrink Identification Marker Sleeves.
The IBM daisy wheel printer and ink cartridge developed for HTMS is now obsolete. TE can only
guarantee the performance properties covered in this standard, and not any marking applied using
non-recommended printing systems. Where non-standard systems are used, customers are
required to carry out their own validation testing.
This system is not recommended where strain relief properties are required. Product is available in
2:1 shrink ratio.
Unless specified, the tube size for qualification testing is 6.4mm (1/4 inch).
The sleeving shall be fabricated from irradiated, thermally stabilized, modified polyvinylidene fluoride
compound. It shall be homogeneous and essentially free from flaws, defects, pinholes, bubbles,
seams, cracks or inclusions.
The sleeves shall be supplied in white, unless otherwise specified.
PROPERTIES
The sleeves shall meet the requirements of Table 3.
The sleeves shall be cut lengths in accordance with Table 1.
