CPC3701C Datasheet CPC3701CTR, CPC3701C | P4-P5

NTEGRATED

IRCUITS

IVISION

www.ixysic.com

R06

CPC3701

Manufacturing Information

Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated

Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to

the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product

evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper

operation of our devices when handled according to the limitations and information in that standard as well as to any

limitations set forth in the information or standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced

product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according

to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

Device Moisture Sensitivity Level (MSL) Rating

CPC3701C MSL 1

ESD Sensitivity

This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.

Soldering Profile

This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020

must be observed.

Device Maximum Temperature x Time Maximum Reﬂ ow Cycles

CPC3701C 260ºC for 30 seconds 3

Board Wash

IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to

remove flux residue is acceptable, and the use of a short drying bake may be necessary. Chlorine-based or

Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be

used.

NTEGRATED

IRCUITS

IVISION

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make

changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated

Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to

its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe

property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-CPC3701-R06

4/10/2015

For additional information please visit our website at: www.ixysic.com

CPC3701

MECHANICAL DIMENSIONS

CPC3701C

CPC3701CTR Tape & Reel

Dimensions

mm MIN / mm MAX

(inches MIN / inches MAX)

2.286 / 2.591

(0.090 / 0.102)

3.937 / 4.242

(0.155 / 0.167)

1.397 / 1.600

(0.055 / 0.063)

0.356 / 0.432

(0.014 / 0.017)

1.626 / 1.829

(0.064 / 0.072)

R 0.254

(R 0.010)

0.889 / 1.194

(0.035 / 0.047)

0.356 / 0.483

(0.014 / 0.019)

0.432 / 0.559

(0.017 / 0.022)

4.394 / 4.597

(0.173 / 0.181)

1.422 / 1.575

(0.056 / 0.062)

2.921 / 3.073

(0.115 / 0.121)

0.60

(0.024)

TYP 3

1.40

(0.055)

2.45

(0.096)

1.90

(0.075)

1.90

(0.074)

5.00

(0.197)

50º

PCB Land Pattern

Pin 1

1.118 / 1.270

(0.044 / 0.050)

50º

0.432 / 0.508

(0.017 / 0.020)

0.864 / 1.016

(0.034 / 0.040)

2.845 / 2.997

(0.112 / 0.118)

45º

Dimensions

(inches)

Embossment

Embossed

Carrier

177.8 Dia

(7.00 Dia)

Top Cover

Tape Thickness

0.102 Max

(0.004 Max)

W=12.00 ± 0.3

(0.472 ± 0.012)

=4.60 ± 0.1

(0.181 ± 0.004)

=4.80 ± 0.1

(0.189 ± 0.004)

P=8.00 ± 0.1

(0.315 ± 0.004)

=1.80 ± 0.1

(0.071 ± 0.004)

2.00 ± 0.05

(0.079 ± 0.002)

4.00 ± 0.1

(0.157 ± 0.004)

1.75 ± 0.1

(0.069 ± 0.004)

5.50 ± 0.05

(0.217 ± 0.002)

P1-P3 P4-P5

CPC3701C

Mfr. #:

Buy CPC3701C

Manufacturer:

IXYS Integrated Circuits

Description:

MOSFET N Channel FET 250V, 360mA

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

CPC3701C

CPC3701C

Products related to this Datasheet