OMO ElectronicOMO Electronic
Expand menu
0 Cart

SE2436L-R

P1-P3P4-P6P7-P9P10-P12P13-P13
DATA SHEET
SE2436L: High Power 2.4 GHz 802.15.4 Front End Module
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202413C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 14, 2014 4
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol Definition Min. Max. Unit
VCC Supply Voltage -0.3 4.8 V
T
OP
Operating temperature -40 85 °C
T
STORAGE
Storage temperature -40 125 °C
ESD all pins (HBM) - 1000 V
Pin_Tx_max Tx input power at TR port - +6 dBm
Pin_Rx_max Rx input power at ANT1 or ANT2 ports - +10 dBm
VSWR Voltage Standing Wave Ratio 10:1
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
TA Ambient temperature -40 25 85 °C
Current drive capability from VB_IN to TRN
and TRP ports
30 mA
VCC Supply voltage on VCC 2.0 4.0 4.8 V
Logic input voltages 0 - 3.6 V
DC Electrical Characteristics
Conditions: VCC = 4.0 V, TA = 25 C, as measured on Skyworks Solutions’s SE2436L-EK1 evaluation board (de-
embedded to device), unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC-Tx27 Total Supply Current
Tx mode P
OUT
= 27 dBm
CPS = CSD = CTX = Logic ‘1’
- 400 - mA
ICQ-Tx Quiescent Current
No RF
CPS = CSD = CTX = Logic ‘1’
- 80 - mA
ICC-Rx Total Supply Current
Rx mode
CRX = CPS = CSD = Logic ‘1’,
CTX = 0 V
- 5 7 mA
ICC-
RxBypass
Total Supply Current
Rx bypass mode
CRX = CSD = Logic ‘1’, CPS =
CTX = 0 V
- - 300 uA
DATA SHEET
SE2436L: High Power 2.4 GHz 802.15.4 Front End Module
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202413C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 14, 2014 5
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC_OFF Sleep Supply Current
No RF, CSD = 0 V or CRX =
CTX = 0 V, all digital controls at
0 V
- - 1 μA
Logic Characteristics
Conditions: VCC = 4.0 V, TA = 25 C, as measured on Skyworks Solutions’ SE2436L-EK1 evaluation board (de-
embedded to device), unless otherwise noted.
Symbol Parameter Note Min. Typ. Max. Unit
V
IH
Logic input high
1.6 - 3.6 V
V
IL
Logic input low
0 - 0.3 V
I
IH
Logic input high
- - 2 µA
I
IL
Logic input low
- - 1 µA
Logic Controls
Conditions: VCC = 4.0 V, TA = 25 C
Mode Mode description Note CPS CSD CRX CTX
0 All off (sleep mode) 1, 3 0 0 0 0
0 All off (sleep mode) 1, 2, 3 0 1 0 0
1 Rx bypass mode 1, 2 0 1 1 0
2 Rx mode 1, 2 1 1 1 0
3 TX bypass mode 1,2 0 1 0 1
4 Tx mode 1, 2 1 1 0 1
5 Auxiliary mode 1,2 1 0 1 X
Note: (1) Logic ‘0’ level compliant to V
IL
as specified in the “Logic Characteristics” table
(2) Logic ‘1’ level compliant to V
IH
as specified in the “Logic Characteristics” table
(3) All logic signals must be in a defined state in order to meet the sleep current specification at 1 uA max
Conditions: VCC = 4.0 V, TA = 25 C
Mode description Note CPS CSD CTX CRX ANT_SEL
ANT1 port enabled 1 X X X X 0
ANT2 port enabled 2 X X X X 1
Note: (1) Logic ‘0’ level compliant to V
IL
as specified in the “Logic Characteristics” table
(2) Logic ‘1’ level compliant to V
IH
as specified in the “Logic Characteristics” table
DATA SHEET
SE2436L: High Power 2.4 GHz 802.15.4 Front End Module
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202413C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 14, 2014 6
AC Electrical Characteristics, Transmit
Conditions: VCC = 4.0 V, TA = 25 C, as measured on Skyworks Solutions’ SE2436L-EK1 evaluation board (de-
embedded to device), all unused ports terminated with 50 Ω, unless otherwise noted.
Symbol Parameter Condition Note Min. Typ. Max. Unit
FIN Frequency Range 2400 - 2483 MHz
Pout
Output power at
ANT1 or ANT2
ports
VCC = 4.0 V
VCC = 3.3 V
VCC = 3.0 V
1 -
27
25
22
- dBm
S21 Small Signal Gain 1 27 30 33 dB
∆S21
Small Signal Gain
Variation
1 - - 2 dBp-p
S21byp
Small Signal Gain
bypass
1 - -2.5 - dB
Tx_G
Large Signal Gain
Variation
Pin at 0 dBm 1 - - 1 dBp-p
HD2-HD10 Harmonics POUT = 27 dBm 1, 2 - - -42 dBm/MHz
ACP Spectral Mask 1, 3 - - -30 dBm
Trise Turn on time 4 - - 800 ns
Tfall Turn off time 5 - - 800 ns
STAB Stability
CW, P
IN = 0 dBm
0.1 GHz – 20 GHz
Load VSWR = 6:1
All non-harmonically related outputs less
than -42 dBm/MHz
RU Ruggedness
CW, PIN = +6 dBm, Load
VSWR = 10:1
No permanent damage
Note: (1) 2400 – 2483 MHz
(2) IEEE 802.15.4 source
(3) Integrated power from band edges to Fc ± 3.5 MHz
(4) From 50% of CTX edge to 90% of final RF output power
(5) From 50% of CTX edge to 10% of final RF output power
P1-P3P4-P6P7-P9P10-P12P13-P13

SE2436L-R

Mfr. #:
Buy SE2436L-R
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Front End 2.4GHz 802.15.4 FEM PA w / 27dBm putput
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet