DATA SHEET
SE2436L: High Power 2.4 GHz 802.15.4 Front End Module
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202413C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 14, 2014 7
AC Electrical Characteristics, Receive
Conditions: VCC = 4.0 V, TA = 25 C, as measured on Skyworks Solutions’ SE2436L-EK1 evaluation board (de-
embedded to device), all unused ports terminated with 50 Ω, unless otherwise noted.
Symbol Parameter Condition Note Min. Typ. Max. Unit
FIN Frequency Range 2400 - 2483 MHz
Rx_gain Receive gain
CPS = CSD = logic ‘1’,
CTX = logic ‘0’
1 9.0 11.5 14 dB
NF Receive noise figure
CPS = CSD = logic ‘1’,
CTX = logic ‘0’
1 - 2.5 3.5 dB
IIP3
Input 3
rd
order
intercept
CPS = CSD = logic ‘1’,
CTX = logic ‘0’
1 -3 2 - dBm
IP1dB
Input 1-dB
compression point
CPS = CSD = logic ‘1’,
CTX = logic ‘0’
1 -13 -8 - dBm
S11
ANT
Antenna port return
loss
1 - -14 -10 dB
Trise Turn on time 2 - - 800 ns
Tfall Turn off time 3 - - 800 ns
G_bp Gain in bypass mode
CPS = CTX = logic ‘0’,
CSD = logic ‘1’
- -3 - dB
IP1dB
Input 1-dB
compression point in
bypass mode
CPS = CTX = logic ‘0’,
CSD = logic ‘1’
19 - - dBm
Note: (1) 2400 – 2483 MHz
(2) From 50% of CTX edge to 90% of final RF output power
(3) From 50% of CTX edge to 10% of final RF output power
AC Electrical Characteristics, Diversity Antenna Function
Conditions: VCC = 4.0 V, T
A = 25 C, as measured on Skyworks Solutions’ SE2436L-EK1 evaluation board (de-
embedded to device), all unused ports terminated with 50 Ω, unless otherwise noted.
Symbol Parameter Min. Typ. Max. Unit
ISOL
ANTSW
Isolation Between ANT1 and ANT2 Ports - -20 - dB
S11
ANT1,2
Input return loss into 50 , ANT1 and ANT2 ports
- -14 -6 dB
S22
ANT1,2
Output return loss into 50 , ANT1 and ANT2 ports
- -14 -6 dB
T
ANT1-ANT2
Antenna 1 to Antenna 2 switching time - 800 - nsec
