IS31LT3360
Integrated Silicon Solution, Inc. – www.issi.com 4
Rev. C, 12/22/2013
ABSOLUTE MAXIMUM RATINGS (NOTE 1)
Input voltage, V
IN
-0.3V ~ +50V
ISENSE voltage, V
SENSE
V
IN
-5V ~ V
IN
+0.3V, V
IN
5V
-0.3V ~ V
IN
+0.3V, V
IN
<5V
LX output voltage, V
LX
-0.3V ~ +50V
Adjust pin input voltage, V
ADJ
-0.3V ~ +6.0V
Switch output current, I
LX
1.5A
Power dissipation, P
D
MAX
(Note 2) 0.94W
Operating temperature, T
A
= T
J
-40°C ~ +105°C, IS31LT3360-SDLS3-TR
-40°C ~ +125°C, IS31LT3360-SDLS4-TR
Storage temperature, T
ST
-55°C ~ +150°C
Junction temperature, T
JMAX
150°C
Junction to ambient,
JA
132.6°C/W
ESD (HBM)
ESD (CDM)
4kV
750V
Note 1:
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other condition beyond those indicated in the operational sections of the specifications is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Note 2:
Detail information please refer to package thermal de-rating curve on Page 12.
ELECTRICAL CHARACTERISTICS
Valid are at V
IN
=12V, typical value at 25°C, unless otherwise noted.
○ Parameter range based on T
A
= -40°C ~ +125°C (Note 3)
The symbol in the table means these parameters are only available in the above temperature range.
Symbol Parameter Conditions Temp. Min. Typ. Max. Unit
V
IN
Input voltage 6 40 V
I
INQ_OFF
Quiescent supply current with output
off
ADJ pin grounded
80 120 160
A
○
60 120 200
I
INQ_ON
Quiescent supply current with output
switching
ADJ pin floating
450 600
A
○
450 680
V
SENSE
Mean current sense threshold
voltage
97 100 103
mV
○
95 100 105
V
SENSEHYS
Sense threshold hysteresis ±15 %
I
SENSE
I
SENSE
pin input current V
SENSE
=V
IN
-0.1V 8 A
V
REF
Internal reference voltage
Measured on ADJ
pin with pin floating
1.2 V
V
ADJ
External control voltage range on
ADJ pin for dc brightness control
0.3 1.2 V
V
ADJ_OFF
DC voltage on ADJ pin to switch
chip from active (on) state to
quiescent (off) state
V
ADJ
falling
0.15 0.2 0.25
V
○
0.11 0.2 0.29
V
ADJ_ON
DC voltage on ADJ pin to switch
chip from quiescent (off) state to
active (on) state
V
ADJ
rising
0.2 0.25 0.3
V
○
0.16 0.25 0.34