ToolStick-F311DC
2 Rev. 0.2
2. Contents
The C8051F311 ToolStick DC (TOOLSTICK300DC) kit contains the following items:
ToolStick C8051F311 Daughter Card
A ToolStick daughter card requires a ToolStick Base Adapter to communicate with the PC. ToolStick Base Adapters
can be purchased at www.silabs.com/toolstick.
3. ToolStick Overview
The purpose of the ToolStick is to provide a development and demonstration platform for Silicon Labs
microcontrollers and to demonstrate the Silicon Labs Simplicity Studio software tools.
The ToolStick development platform consists of two components: the ToolStick Base Adapter and a daughter card.
The ToolStick Base Adapter provides a USB debug interface and data communications path between a Windows
PC and a target microcontroller.
The target microcontroller and application circuitry are located on the daughter card. Some daughter cards, such
as the C8051F311 Daughter Card, are used as general-purpose development platforms for the target
microcontrollers and some are used to demonstrate a specific feature or application.
The C8051F311 Daughter Card includes an LED, a potentiometer, a switch connected to a GPIO, and a small
prototyping area which provides access to all of the pins of the device. This prototyping area can be used to
connect additional hardware to the microcontroller and use the daughter card as a development platform.
Figure 3 shows the ToolStick C8051F311 Daughter Card and identifies the various components.
Figure 3. ToolStick C8051F311 Daughter Card
Power LED
P1.0 LED
P1.2 Potentiometer
C8051F311
P0.7 Switch
Full Pin Access