4 Freescale Semiconductor
CAUTIONARY NOTES
Electrostatic Discharge (ESD) prevention measures should be used when handling this
product. ESD damage is not a warranty repair item.
Axiom Manufacturing does not assume any liability arising out of the application or use of
any product or circuit described herein; neither does it convey any license under patent
rights or the rights of others.
EMC Information on the APS08QG8SLK board:
a) This product, as shipped from the factory with associated power supplies and cables,
has been verified to meet with FCC requirements as a CLASS A product.
b) This product is designed and intended for use as a development platform for hardware
or software in an educational or professional laboratory.
c) In a domestic environment, this product may cause radio interference in which case the
user may be required to take adequate prevention measures.
d) Attaching additional wiring to this product or modifying the product operation from the
factory configuration may affect its performance and cause interference with other
apparatus in the immediate vicinity. If such interference is detected, suitable mitigating
measures should be taken.
TERMINOLOGY
This development board uses option selection jumpers. A jumper is a plastic shunt that
connects 2 terminals electrically. Terminology for application of the option jumpers is as
follows:
Jumper – a plastic shunt that connects 2 terminals electrically
Jumper on, in, or installed - jumper is installed such that 2 pins are connected together
Jumper off, out, or idle - jumper is installed on 1 pin only. It is recommended that
jumpers be idled by installing on 1 pin so they will not be lost.
Cut-Trace – a circuit trace connection between component pads. The circuit trace may
be cut using a razor knife to break the default connection. To reconnect the circuit,
simply install a suitably sized 0-ohm resistor or attach a wire across the pads.
Throughout this document, where used, the name APS08QG8SLK applies equally to the
APS08QG8SLK, CSM9S08QG8SLK, and PBS08QG8SLK.
Freescale Semiconductor 5
FEATURES
The APS08QG8SLK is an educational application module for the Freescale Semiconductor
MC9S08QG8 microcontroller. Development of applications is quick and easy with the
integrated USB-BDM, sample software tools, and examples. An optional BDM_PORT port is
also provided to allow use of a BDM_PORT cable. A 32-pin connector allows connecting the
APS08QG8SLK board to an expanded evaluation environment.
MC9S08QG8 CPU, 16-pin DIP, Socketed
8K Byte Flash
512 Bytes RAM
Internal 32 kHz Oscillator, trimmable to ±0.2%
12 GPIO, 1 Input Only, 1 Output only
Timer Interface Module
SCI and SPI Communication Ports
IIC Module
8 KBI inputs
2-Ch, 16-bit, Timer Interface
8-Ch, 10-bit Analog to Digital Converter (ATD)
Analog Comparator w/ internal compare
Integrated USB-BDM
RS-232 Serial Port w/ DB9 Connector
SPI, IIC ports available on Connector J1
External 32.768 kHz Clock Oscillator (not
installed)
Power Input Selection Jumper
Power input from USB-BDM
Power input from on-board regulator
Power input from Connector J1
Power output through Connector J1
User Components Provided
3 Push Switches; 2 User, 1 Reset
3 LED Indicators; 2 User, 1 VDD
Jumpers
USER_EN
PWR_SEL
COM_SEL
VX_EN
OSC_EN (not installed)
Connectors
32-pin MCU I/O Connector
2.0mm Barrel Connector
BDM_PORT Pin Header (not installed)
DB9 Serial Connector
Specifications:
Board Size 2.9” x 2.5”
Power Input:
USB Cable – 500mA max
PWR Connector - 9VDC typical, +7VDC to +18VDC
6 Freescale Semiconductor
REFERENCES
Reference documents are provided on the support CD in Acrobat Reader format. More
information can be found in the Application Notes section of the Freescale Web site.
APS08QG8SLKUG.pdf APS08QG8SLK User Guide (this document)
HCS08QG8SCHEMSLKREVC.pdf APS08QG8SLK Board Schematic, Rev. C
DEMO9S08QG8QSG.pdf Quick Start Guide for Demonstration application
DEMO9S08QG8TEST.zip CodeWarrior demonstration application software
DEMO9S08QG8_APP.pdf Test Application User Guide
DEMO9S08QG8APP.zip CodeWarrior LED demonstration application software
AN2627.pdf Cycle-by-Cycle Instruction Details for HC(S)08 MCU’s
Visit www.freescale.com\universityprogram for current product information, reference materials
and updates.

DEMO9S08QG8

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
MC9S08QG8 EVAL BRD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet