OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ADUM6000ARWZ-RL

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17
Isolated, 5 kV, DC-to-DC Converter
Data Sheet
ADuM6000
Rev. D Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2010–2013 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
isoPower integrated, isolated dc-to-dc converter
Regulated 5 V or 3.3 V output
Up to 400 mW output power
16-lead SOIC wide-body package (RW-16)
16-lead SOIC wide-body package with enhanced
creepage (RI-16-2)
High temperature operation: 105°C maximum
High common-mode transient immunity: >25 kV/μs
Thermal overload protection
Safety and regulatory approvals
UL recognition
5000 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A (pending)
IEC 60601-1: 250 V rms, 8 mm package (RI-16-2)
IEC 60950-1: 400 V rms, 8 mm package (RI-16-2)
VDE certificate of conformity (RW-16) (pending)
IEC 60747-5-2 (VDE 0884 Part 2):2003-01
V
IORM
= 846 V peak
VDE certificate of conformity (RI-16-2)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
V
IORM
= 846 V peak
APPLICATIONS
USB peripheral power
RS-232/RS-422/RS-485 transceiver power
Industrial field bus power
Industrial PLCs
GENERAL DESCRIPTION
The ADuM6000
1
is an isolated dc-to-dc converter based on the
Analog Devices, Inc., iCoupler® technology. The dc-to-dc converter
in this device provides regulated, isolated power in several combi-
nations of input and output voltages as listed in Table 1.
The Analog Devices chip scale transformer iCoupler technology
transfers isolated power in this dc-to-dc converter with up to
31% efficiency. The result is a small form factor, total isolation
solution.
Higher output power levels are obtained by using the ADuM6000
to augment the power output of the ADuM5401, ADuM5402,
ADuM5403, ADuM5404, ADuM520x, and ADuM620x iCouplers
with isoPower®.
isoPower uses high frequency switching elements to transfer
power through its transformer. Special care must be taken
during printed circuit board (PCB) layout to meet emissions
standards. See the AN-0971 Application Note for board layout
recommendations.
Table 1. Power Levels
Input Voltage Output Voltage Output Power
5 V 5 V 400 mW
5 V 3.3 V 330 mW
3.3 V 3.3 V 132 mW
FUNCTIONAL BLOCK DIAGRAM
V
DD1
GND
1
NC
RC
IN
RC
OUT
RC
SEL
V
DD1
OSCILLATOR
GND
1
V
ISO
GND
ISO
NC
V
SEL
NC
NC
V
ISO
GND
ISO
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
ADuM6000
RECTIFIER REGULA TOR
0
8624-001
Figure 1.
1
Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329; other patents pending.
ADUM6000* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
DOCUMENTATION
Application Notes
• AN-0971: Recommendations for Control of Radiated
Emissions with isoPower Devices
• AN-770: iCoupler® Isolation in CAN Bus Applications
• AN-793: ESD/Latch-Up Considerations with iCoupler®
Isolation Products
• AN-913: Isolating I2C Interfaces
Data Sheet
• ADuM6000: Isolated, 5 kV, DC-to-DC Converter Datasheet
User Guides
• UG-042: Evaluating 16-Lead SOIC and 16-Lead QSOP
Digital Isolators
• UG-181: PLC Demo System, Industrial Process Control
Demo System
REFERENCE DESIGNS
• CN0280
REFERENCE MATERIALS
Informational
• First Digital Isolators to Achieve 8.3mm Creepage
Packaging
Press
• Analog Devices Achieves Major Milestone by Shipping 1
Billionth Channel of iCoupler Digital Isolation
Product Selection Guide
• Digital Isolator Product Selection and Resource Guide
Technical Articles
• Creepage Requirements for Medical Applications
• Inside iCoupler® Technology:ADuM347x PWM Controller
and Transformer Driver with Quad-Channel Isolators
Design Summary
• MS-2204: Power Blanking for Increased Accuracy Using
iso
Power Devices
• N
App
kin Note: Lowering the Power of the ADuM524x
DESIGN RESOURCES
• ADuM6000 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
DISCUSSIONS
View all ADuM6000 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
ADuM6000 Data Sheet
Rev. D | Page 2 of 16
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Electrical Characteristics—5 V Primary Input Supply/5 V
Secondary Isolated Supply .......................................................... 3
Electrical Characteristics—3.3 V Primary Input Supply/3.3 V
Secondary Isolated Supply .......................................................... 3
Electrical Characteristics—5 V Primary Input Supply/3.3 V
Secondary Isolated Supply .......................................................... 4
Package Characteristics ............................................................... 4
Regulatory Information ............................................................... 5
Insulation and Safety-Related Specifications ............................ 5
DIN V VDE V 0884-10 (VDE V 0884-10) and IEC 60747-5-2
(VDE 0884 Part 2):2003-01 Insulation Characteristics ........... 6
Recommended Operating Conditions .......................................7
Absolute Maximum Ratings ............................................................8
ESD Caution...................................................................................8
Pin Configuration and Function Descriptions ..............................9
Typical Performance Characteristics ........................................... 10
Applications Information .............................................................. 12
PCB Layout ................................................................................. 12
Start-Up Behavior....................................................................... 12
EMI Considerations ................................................................... 13
Thermal Analysis ....................................................................... 13
Current Limit and Thermal Overload Protection ................. 13
Power Considerations ................................................................ 13
Increasing Available Power ....................................................... 14
Insulation Lifetime ..................................................................... 15
Outline Dimensions ....................................................................... 16
Ordering Guide .......................................................................... 16
REVISION HISTORY
7/13—Rev. C to Rev. D
Changed RI-16-1 Package to RI-16-2 Package (Throughout) ... 1
Changes to Table 8 and Figure 2 ..................................................... 6
Updated Outline Dimensions ....................................................... 16
Changes to Ordering Guide .......................................................... 16
5/12—Rev. B to Rev. C
Created Hyperlink for Safety and Regulatory Approvals
Entry in Features Section ................................................................. 1
Changes to Ordering Guide .......................................................... 16
9/11—Rev. A to Rev. B
Change to Features Section ............................................................. 1
Changes to Table 6 ............................................................................ 5
9/11—Rev. 0 to Rev. A
Changes to Features and Applications Sections ........................... 1
Changes to Table 6 and Table 7 ....................................................... 5
Changes to DIN V VDE V 0844-10 (VDE V 0884-10) and
IEC 60747-5-2 (VDE 0884 Part 2):2003-01 Insulation
Characteristics Section ..................................................................... 6
Changes to Table 11 .......................................................................... 8
Updated Outline Dimensions ....................................................... 16
Changes to Ordering Guide .......................................................... 16
10/10—Revision 0: Initial Version
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P17

ADUM6000ARWZ-RL

Mfr. #:
Buy ADUM6000ARWZ-RL
Manufacturer:
Analog Devices / Linear Technology
Description:
Switching Voltage Regulators 5kV DC/DC Converter
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet