I
NTEGRATED
C
IRCUITS
D
IVISION
CPC1466
4 www.ixysic.com R02
1.4 Electrical Characteristics
Unless otherwise specified, minimum and maximum values are guaranteed by production testing requirements.
Typical values are characteristic of the device and are the result of engineering evaluations. In addition, typical values
are provided for informational purposes only and are not part of the testing requirements.
All electrical specifications are provided for T
A
=25C
1.4.1 DC Characteristics, Normal Operation
For operational templates: (see Figure 2 on page 5) and (see Figure 3 on page 5).
1.4.2 AC Characteristics, Normal Operation
For test conditions: (see Figure 4 on page 6).
1.4.3 Transition Characteristics, Normal Operation
For activation/deactivation test conditions: (see Figure 5 on page 7).
Parameter Conditions Symbol Minimum Typical Maximum Unit
Activate/Non-activate Voltage Off State
V
AN
30.0 35.0 39.0 V
Breakover current -
I
BO
-0.51mA
DC Voltage drop
Active State, 1 mA I
SL
20 mA V
ON
-12.515 V
DC leakage current
V
OFF
= 20 V I
LKG
-1.55A
Hold/Release current Active State
I
H/R
0.1 0.5 1.0 mA
Minimum on current
V
ON
< 54 V I
MIN1
20 38 - mA
54 V V
ON
100 V for 2 seconds,
source resistance 200 to 4 k
I
MIN2
9.0 45 - mA
V
ON
> 100 V I
MIN3
00.1-mA
Maximum on current
V
ON
70 V I
MAX1
-38.470mA
V
ON
> 70 V I
MAX2
-- mA
Photodiode drive current Active State
I
PD
0.2 0.3 10 mA
Parameter Conditions Symbol Minimum Typical Maximum Unit
AC impedance 200 Hz to 50 kHz
Z
MT
10 38
-
k
Linearity distortion
f= 200 Hz to 40 kHz, I
SL
= 1 mA to
20 mA, V
APP
12 V
PP
D4070 - dB
Parameter Conditions Symbol Minimum Typical Maximum Unit
Activate time (see Figure 6 on page 7) t1 3.0 13 50 ms
Deactivate time (see Figure 7 on page 7) t2 3.0 - 100 ms
