MP6905- FAST TURN-OFF, INTELLIGENT RECTIFIER
MP6905 Rev. 1.0 www.MonolithicPower.com 3
5/5/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2015 MPS. All Rights Reserved.
ABSOLUTE MAXIMUM RATINGS
(1)
V
DD
to V
SS
................................... –0.3V to +27V
PGND to V
SS
.............................. –0.3V to +0.3V
V
G
to V
SS
........................................ –0.3V to V
CC
V
D
to V
SS
................................... –0.7V to +180V
LL, EN to V
SS
............................. –0.3V to +6.5V
Continuous Power Dissipation (T
A
= +25°C)
(2)
SOIC8 ........................................................ 1.4W
Junction Temperature .............................. 150°C
Lead Temperature (Solder) ...................... 260°C
Storage Temperature ............. –55°C to +150°C
Recommended Operation Conditions
(3)
V
DD
to V
SS
.......................................... 8V to 24V
Maximum Junction Temp. (T
J
) .................... +125°C
Thermal Resistance
(4)
θ
JA
θ
JC
SOIC8 .................................... 90 ...... 45 ... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance θ
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX)=(T
J
(MAX)-
T
A
)/θ
JA
. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.