TDA7565 Examples of bytes sequence
Doc ID 9800 Rev 5 15/19
5 Examples of bytes sequence
1 - Turn-on of the power amplifier with 26 dB gain, mute on, diagnostic defeat, high eff.
mode, voltage converter disabled.
2 - Turn-off of the power amplifier
4 - Offset detection procedure start
5 - Offset detection procedure stop and reading operation.
● The purpose of this test is to check if a D.C. offset (2V typ.) is present on the outputs,
produced by input capacitor with anomalous leakage current or humidity between pins.
● The delay from 3 to 4 can be selected by software, starting from 1 ms
Start Address byte with D0 = 0 ACK IB1 ACK IB2 ACK STOP
XX00X000 0XX1XX10
Start Address byte with D0 = 0 ACK IB1 ACK IB2 ACK STOP
XXXXXXXX XXX0XXX0
Start Address byte with D0 = 0 ACK IB1 ACK IB2 ACK STOP
XX1XX11X XXX1XXX0
Start Address byte with D0 = 1 ACK DB1 STOP