OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

OHN3131U

P1-P3P4-P6P7-P9P10-P10
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Hallogic Hall-effect Sensors
OH090U, OH180U, OH360U
OHN3000 Series, OHS3000 Series
OHN3100 Series, OHS3100 Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B.1 01/09
Page 1 of 10
Applications:
• Non-contact reflective object
sensor
• Assembly line automation
• Machine automation
• Machine safety
• End of travel sensor
• Door sensor
Features:
• Designed for non-contact switching operations
• Operates over broad range of supply voltages (4.5 V to 24 V)
• Operates with excellent temperature stability in harsh
environments
• Drive capability up to 7 TTL loads
Description:
These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear
amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a band
gap voltage regulator to allow operation with a wide range of supply voltages. These devices feature logic level
output and provide up to 21 mA of sink current. This allows direct driving of more than 7 TTL loads or any
standard logic family using power supplies ranging from 4.5 to 24 volts. Output amplitude is constant at switching
frequencies from DC to over 200 kHz.
The Uni-Polar turns on with a (logic level “0”) after a sufficient magnetic field from the south pole of a magnet
approached the symbolized face of the device (Operating Point) and turns off (logic level “1”) after the magnetic
field reached a minimum value. The Bi-Polar latch device turns on (logic level “0”) in the presence of a magnetic
south pole and turn off (logic level “1”) when subjected to a magnetic north pole. Both magnetic poles are
necessary for operation for Bi-Polar devices. This feature makes these sensors ideal for applications in non-
contact switching operations, brushless DC motors and for use with multiple pole magnets.
RoHS
Ordering Information
Through Hole Configuration
OHN3075U
OHS3075U
OHN3175U
OHS3175U
OHN3177U
OHS3177U
Bi-Polar
latching
Through Hole
Ordering Information
Through Hole Configuration
OH090U
OH180U
OH360U
OHN3013U
OHN3113U
OHN3019U
OHS3019U
OHN3119U
OHS3119U
OHN3020U
OHS3020U
OHN3120U
OHS3120U
OHN3030U
OHS3030U
OHN3130U
OHS3130U
OHN3131U
OHS3131U
OHN3040U
OHS3040U
OHN3140U
OHS3140U
Unipolar
non-latching
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Hallogic Hall-effect Sensors
OH090U, OH180U, OH360U
OHN3000 Series, OHS3000 Series
OHN3100 Series, OHS3100 Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B.1 01/09
Page 2 of 10
Pin # Transistor
1 V
CC
2 Ground
3 Output
Hall
Element
Voltage
Regulator
2
3
1Vcc
Output
Ground
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Hallogic Hall-effect Sensors
OH090U, OH180U, OH360U
OHN3000 Series, OHS3000 Series
OHN3100 Series, OHS3100 Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B.1 01/09
Page 3 of 10
Notes:
(1) South pole facing symbolized surface.
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
B
OP
Magnetic Operate Point
(1)
70 180 290 Gauss
B
RP
Magnetic Release Point 0 140 230 Gauss
B
H
Magnetic Hysteresis 20 40 120 Gauss
Icc Supply Current - 6 9 mA Vcc = 24 V, Output Off
V
OL
Output Saturation Voltage - 100 300 mV Vcc = 4.5 V, I
OL
= 20 mA, B ≥ 290 Gauss
I
OH
Output Leakage Current - 0.5 10.0 µA Vcc = 24 V, V
OUT
= 24 V, B ≤ 0 Gauss
t
r
Output Rise Time - 0.21 1.00 µs
R
L
= 820 Ω, C
L
= 20 pF, Vcc = 14 V
t
f
Output Fall Time - 0.10 1.00 µs
OH180U Uni-Polar
OH090U Uni-Polar
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
B
OP
Magnetic Operate Point
(1)
0 90 180 Gauss
B
RP
Magnetic Release Point -100 65 100 Gauss
B
H
Magnetic Hysteresis 10 25 100 Gauss
Icc Supply Current - 6 9 mA Vcc = 24 V, Output Off
V
OL
Output Saturation Voltage - 100 300 mV Vcc = 4.5 V, I
OL
= 20 mA, B ≥ 180 Gauss
I
OH
Output Leakage Current - 0.5 10.0 µA Vcc = 24 V, V
OUT
= 24 V, B ≤ -100 Gauss
t
r
Output Rise Time - 0.21 1.00 µs
R
L
= 820 Ω, C
L
= 20 pF, Vcc = 14 V
t
f
Output Fall Time - 0.10 1.00 µs
Electrical Characteristics (Vcc = 4.5 V to 24 V, T
A
= 25° C unless otherwise noted)
Absolute Maximum Ratings (T
A
=25°C unless otherwise noted)
Supply Voltage, Vcc 25 V
Storage Temperature Range, T
S
-65°C to +160°C
Operating Temperature Range, T
A
OHN30_ _U
OHS30_ _U
OH090/180/360U
-20°C to +85°C
-40°C to +125°C
-40°C to +150°C
Lead Soldering Temperature (1/8 in. (3.2 mm) from case for 5 sec. with soldering iron) 260°C
(1)
Output ON Current, I
SINK
25 mA
Output OFF Voltage, V
OUT
25 V
Magnetic Flux Density, B Unlimited
P1-P3P4-P6P7-P9P10-P10

OHN3131U

Mfr. #:
Buy OHN3131U
Manufacturer:
Optek / TT Electronics
Description:
Board Mount Hall Effect / Magnetic Sensors Hall Effect Sensor
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet