AD648J/A/S AD648K/B/T
Model Min Typ Max Min Typ Max Unit
OUTPUT CHARACTERISTICS
Voltage @ R
L
10 k,
T
MIN
to T
MAX
±12/±12/±12 ±13 ±12 ±13 V
Voltage @ R
L
5 k,
T
MIN
to T
MAX
±11/±11/±11 ±12 ±11 ±12 V
Short Circuit Current 15 15 mA
POWER SUPPLY
Rated Performance ±15 ±15 V
Operating Range ±4.5 ±18 ±4.5 ±18 V
Quiescent Current (Both Amplifiers) 340 400 340 400 µA
TEMPERATURE RANGE
Operating, Rated Performance
Commercial (0°C to 70°C) AD648J AD648K
Industrial (–40°C to +85°C) AD648A AD648B
Military (–55°C to +125°C) AD648S AD648T
PACKAGE OPTIONS
SOIC (R-8) AD648JR AD648KR
Plastic (N-8) AD648JN AD648KN
CERDIP (Q-8) AD648AQ
5
, AD648SQ
5
AD648BQ
5
, AD648TQ/883B
5
Tape and Reel AD648JR-REEL, AD648JR-REEL7 AD648KR-REEL, AD648KR-REEL7
NOTES
1
Input Offset Voltage specifications are guaranteed after five minutes of operation at T
A
= 25°C.
2
Bias Current specifications are guaranteed maximum at either input after five minutes of operation at T
A
= 25°C. For higher temperature, the current doubles
every 10°C.
3
Matching is defined as the difference between parameters of the two amplifiers.
4
Defined as voltages between inputs, such that neither exceeds ±10 V from ground.
5
Not for new design. Obsolete April 2002.
Specifications subject to change without notice.
AD648
REV. E
–3–
SPECIFICATIONS
(Continued)
AD648
REV. E
–4–
WARNING!
ESD SENSITIVE DEVICE
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD648 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
ABSOLUTE MAXIMUM RATINGS
1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±18 V
Internal Power Dissipation
2
. . . . . . . . . . . . . . . . . . . . 500 mW
Input Voltage
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage . . . . . . . . . . . . . . . . . . +V
S
and –V
S
Storage Temperature Range (Q, H) . . . . . . . –65°C to +150°C
Storage Temperature Range (N, R) . . . . . . . . –65°C to +125°C
Operating Temperature Range
AD648J/K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
AD648A/B . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
AD648S/T . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . . . 300°C
NOTES
1
Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2
Thermal Characteristics:
8-Pin Plastic Package: θ
JA
= 165°C/Watt
8-Pin CERDIP Package: θ
JC
= 22°C/Watt; θ
JA
= 110°C/Watt
8-Pin SOIC Package: θ
JC
= 42°C/Wat; θ
JA
= 160°C/Watt
3
For supply voltages less than ±18 V, the absolute maximum input voltage is equal
to the supply voltage.
AD648
REV. E
–5–
Typical Performance Characteristics—

AD648KRZ-REEL

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Operational Amplifiers - Op Amps LOW POWER DUAL IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union