Package information ESDALC6V1-1BU2
6/11 Doc ID 15583 Rev 3
3 Package information
● Epoxy meets UL94, V0
● Bar indicates pin 1
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Note: Product marking may be rotated by multiples of 90° for assembly plant differentiation. In no
case should this product marking be used to orient the component for its placement on a
PCB. Only pin 1 mark is to be used for this purpose.
Table 3. ST0201 dimensions
Ref
Dimensions
Millimetres Inches
Min Typ Max Min Typ Max
A 0.23 0.28 0.33 0.009 0.011 0.013
b1 0.13 0.18 0.23 0.005 0.007 0.009
b2 0.14 0.19 0.24 0.006 0.007 0.009
D 0.55 0.60 0.65 0.022 0.024 0.026
E 0.25 0.30 0.35 0.010 0.012 0.014
e - 0.35 - - 0.014 -
L1 0.20 0.25 0.30 0.008 0.010 0.012
L2 0.20 0.25 0.30 0.008 0.010 0.012
D
E
A
b1
b1
b2
b2
e
e
L2
L2
L1
L1
To p
Side
Bottom
Pin 1 available in different forms
Pin 1
Bottom
Figure 12. Footprint (dimensions in mm) Figure 13. Marking
0.425
0.20
0.30
0.425
1.05
Pin1
Pin 2
D1
