12
MY MY
■ ACCESSORIES (continued)
Unit: mm (inch)
Socket mounting plates [t=1.52 (.06)]
PYP-1 PYP-18 PYP-36
Number of socket specs.
Socket needed 1 18 36
PY08, PY11, PY11QN, PYP-1 PYP-18 PYP-36
PY14, PY4QN
■ RELAY OPTIONS
LED Indicator
Specifications and dimensions same as the standard type
with the following exception. Because an LED indicator is
employed as the operation indicator, the rated current is
approximately 3.8 mA higher in the DC types and 0.5 to 5 mA
higher in the AC types than in the standard type.
Ambient operating temperature: -55° to 60°C (-67° to 140°F).
Green LED ............ DC
Red LED ............... AC
Terminal arrangement/Internal connections (Bottom view)
MY4N
DC coil rating type AC coil rating type
Note: 1. In MY2N and MY3N, only the contact circuit is different from the illustration below. The coil terminals 10 and 11 of MY3N
become (-) and (+), respectively.
2. Pay special attention to the polarities when using the DC type.
3. The AC coil-type is provided with a self-diagnostic function that detects a breakage in the coil.
RC Circuit
Specifications and dimensions same as the standard type with the
following exceptions.
The panel cutout dimensions are the same as those of the standard type.
However, the height is higher by 17.02 mm (0.67 in).
Note: 1. The above dimensioned drawing shows the 4-pole type. The dimensions of the 2- and 3-pole types are identical to the 4-
pole type.
2. Available on AC versions only.
3. Terminal arrangement/internal connections: MY2-Y is the same as the standard type; MY2N-Y is the same as the LED
indicator type.
Terminal arrangement/
Internal connections
(Bottom view)
