VN610SP-E Electrical specifications
Doc ID 10889 Rev 5 13/27
Table 12. Electrical transient requirements on V
CC
pin (part 1/3)
ISO T/R 7637/1
test pulse
Test levels
I II III IV
Delays and
impedance
1 -25 V -50 V -75 V -100 V 2 ms 10 Ω
2 +25 V +50 V +75 V +100 V 0.2 ms 10 Ω
3a -25 V -50 V -100 V -150 V 0.1 µs 50 Ω
3b +25 V +50 V +75 V +100 V 0.1 µs 50 Ω
4 -4 V -5 V -6 V -7 V 100 ms, 0.01
Ω
5 +26.5 V +46.5 V +66.5 V +86.5 V 400 ms, 2
Ω
Table 13. Electrical transient requirements on V
CC
pin (part 2/3)
ISO T/R 7637/1
test pulse
Test levels results
I II III IV
1CCCC
2CCCC
3aCCCC
3bCCCC
4CCCC
5CEEE
Table 14. Electrical transient requirements on V
CC
pin (part 3/3)
Class Contents
C All functions of the device are performed as designed after exposure to disturbance.
E
One or more functions of the device is not performed as designed after exposure to
disturbance and cannot be returned to proper operation without replacing the device.
Electrical specifications VN610SP-E
14/27 Doc ID 10889 Rev 5
Figure 6. Waveforms
SENSE CURRENT
INPUT
NORMAL OPERATION
UNDERVOLTAGE
V
CC
V
USD
V
USDhyst
INPUT
OVERVOLTAGE
V
CC
SENSE CURRENT
INPUT
SENSE
LOAD CURRENT
LOAD CURRENT
LOAD CURRENT
OVERTEMPERATURE
INPUT
SENSE CURRENT
T
TSD
T
R
T
j
LOAD CURRENT
V
OV
V
OVhyst
V
CC
> V
USD
SHORT TO GROUND
INPUT
LOAD CURRENT
SENSE CURRENT
LOAD VOLTAGE
INPUT
LOAD VOLTAGE
SENSE CURRENT
LOAD CURRENT
<Nominal
<Nominal
SHORT TO V
CC
I
SENSE
=V
SENSEH
/(R
SENSE
+R
SENSEH
)
VN610SP-E Electrical specifications
Doc ID 10889 Rev 5 15/27
2.4 Electrical characteristics curves
Figure 7. Off-state output current Figure 8. High level input current
Figure 9. Input low level Figure 10. Input high level
Figure 11. Input clamp voltage Figure 12. Input hysteresis voltage

VN610SP-E

Mfr. #:
Manufacturer:
STMicroelectronics
Description:
Gate Drivers SINGLE HIGH SIDE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet