MAX3130/MAX3131
3V to 5.5V, IrDA Infrared Transceiver with
Integrated RS-232 Interface
4 _______________________________________________________________________________________
Typical Operating Characteristics
(V
CC
= AV
CC
= 3.3V, GND = AGND = PGND, C1–C4 = 0.1µF, R
L
= 3kΩ, T
A
= +25°C, unless otherwise noted.)
Note 1: C1–C4 = 0.1µF, tested at +3.3V ±10%. C1 = 0.047µF, C2–C4 = 0.33µF, tested at +5.0V ±10%.
Note 2: All supply current measurements are made under no-load condition on all outputs, and all input voltages are at V
CC
or GND.
Note 3: For a compliant IrDA input signal where the data rate is within the supported data rate for the IR receive mode: rise/fall
times are less than 600ns and pulse widths are between 1.41µs and 3/16 of the baud rate.
630
MIN TYP MAX
V
CC
= 3.3V, R
L
= 3kΩ to
7kΩ, measured from
+3V to -3V or -3V to +3V,
T
A
= +25°C
Transition-Region Slew Rate V/µs
UNITSCONDITIONSPARAMETER
100Delay until transmitter outputs are validTransmitter Enable Time µs
C
L
= 150pF to 1000pF
C
L
= 150pF to 2500pF 430
ELECTRICAL CHARACTERISTICS (continued)
(V
CC
= AV
CC
= 3.0V to 5.5V, GND = AGND = PGND, C1–C4 = 0.1µF (Note 1), T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical
values are at T
A
= +25°C and V
CC
= AV
CC
= 3.3V.)