74AHC_AHCT125_4 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 04 — 11 January 2008 4 of 15
NXP Semiconductors
74AHC125; 74AHCT125
Quad buffer/line driver; 3-state
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] P
tot
derates linearly with 8 mW/K above 70 °C.
[3] P
tot
derates linearly with 5.5 mW/K above 60 °C.
[4] P
tot
derates linearly with 4.5 mW/K above 60 °C.
8. Recommended operating conditions
9. Static characteristics
T
stg
storage temperature −65 +150 °C
P
tot
total power dissipation T
amb
= −40 °C to +125 °C
SO14 package
[2]
- 500 mW
TSSOP14 package
[3]
- 500 mW
DHVQFN14 package
[4]
- 500 mW
Table 4. Limiting values
…continued
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
Table 5. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions 74AHC125 74AHCT125 Unit
Min Typ Max Min Typ Max
V
CC
supply voltage 2.0 5.0 5.5 4.5 5.0 5.5 V
V
I
input voltage 0 - 5.5 0 - 5.5 V
V
O
output voltage 0 - V
CC
0-V
CC
V
T
amb
ambient temperature −40 +25 +125 −40 +25 +125 °C
∆t/∆V input transition rise
and fall rate
V
CC
= 3.3 V ± 0.3 V - - 100 - - - ns/V
V
CC
= 5.0 V ± 0.5 V - - 20 - - 20 ns/V
Table 6. Static characteristics
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions 25 °C −40 °C to +85 °C −40 °C to +125 °C Unit
Min Typ Max Min Max Min Max
For type 74AHC125
V
IH
HIGH-level
input voltage
V
CC
= 2.0 V 1.5 - - 1.5 - 1.5 - V
V
CC
= 3.0 V 2.1 - - 2.1 - 2.1 - V
V
CC
= 5.5 V 3.85 - - 3.85 - 3.85 - V
V
IL
LOW-level
input voltage
V
CC
= 2.0 V - - 0.5 - 0.5 - 0.5 V
V
CC
= 3.0 V - - 0.9 - 0.9 - 0.9 V
V
CC
= 5.5 V - - 1.65 - 1.65 - 1.65 V