FTLX6611MCC and FTLX6614MCC T-XFP Product Specification
Finisar Corporation August 2015 Rev. B1 Page 6
Data rate
(Gb/s)
BER Dispersion (ps/nm)
Sensitivity back-to-
(dBm)
Dispersion Pe
at OSNR>30dB
(dB)
Threshold
Adjust
Required
6
Data rate
(Gb/s)
BER Dispersion (ps/nm)
Min OSNR Back-to-
back at Power:
-14 to -2dBm (dB)
Max O
at Power:
-14 to -2dBm (dB)
Threshold
Adjust
Required
Notes
:
1. Corresponds to approximately 0.4 nm.
2. λc = Specified ITU Grid wavelength. Wavelength stability is achieved within 30 seconds of power up.
3. Measured with a host jitter of 50 mUI peak-to-peak.
4. Measured with a host jitter of 7 mUI RMS.
5. Measured at 1528-1600nm with worst ER; PRBS31.
6. All OSNR measurements are performed with 0.1nm resolution.
V. Additional Specifications and Response Timing
Maximum Supported Link Length
PMD Penalty (30ps of DGD)
Notes:
1. Amplified SONET OC-192, 10G Ethernet, SONET OC-192 with FEC, 10G Ethernet with FEC, 10G
Fibre Channel with FEC.
2. Distance indicates dispersion budget. Optical amplification may be required to achieve maximum
distance.
Transmitter Power Monitor Accuracy
Initial accuracy at 25C: +/- 1.5dB.
Relative accuracy over temperature, voltage and aging: +/- 2dB.
Received Optical Power Monitor Accuracy (applicable measurement range defined from
-17dBm to -1dBm)
Initial accuracy at 25C: +/- 1.5dB.
Relative accuracy over temperature, voltage and aging: +/- 2dB.