M500IT 2.5-Inch SATA NAND Flash MLC
SSD
MTFDDAK060MBD, MTFDDAK120MBD, MTFDDAK240MBD,
MTFDDAK064MBD, MTFDDAK128MBD, MTFDDAK256MBD
Features
• Micron
®
20nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• TCG/Opal 2.0-compliant self-encrypting drive
(SED)
• Hardware-based AES-256 encryption engine
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
• Industry-standard, 512-byte sector size support
• Hot-plug/hot-remove capable
• Device sleep (DEVSLP), extreme low-power mode
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS3 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and se-
cure erase
• Sanitize device feature set support
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Adaptive thermal monitoring
• Power loss protection for data-at-rest
• Performance
1, 2
– Sequential 128KB READ: Up to 500 MB/s
– Sequential 128KB WRITE: Up to 250 MB/s
– Random 4KB READ: Up to 65,000 IOPS
– Random 4KB WRITE: Up to 60,000 IOPS
– READ/WRITE latency: 160µs/40µs (TYP)
• Reliability
– MTTF: 3.0 million device hours
3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 10
16
bits read
• Low power consumption
– 150mW TYP
4
• Endurance: Total bytes written (TBW)
– Up to 240TB
• Capacity (unformatted): 60GB, 64GB, 120GB,
128GB, 240GB, 256GB
• 2.5 inch × 7mm form factor
• Secure firmware update with digitally signed firm-
ware image
• Operating temperature
– Extended range (–40°C to +85°C)
5
Notes:
1. Typical I/O performance numbers as meas-
ured fresh-out-of-the-box (FOB) using Iome-
ter with a queue depth of 32 and write
cache enabled.
2. 4KB transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active average power measured during exe-
cution of MobileMark
®
with DIPM (device-
initiated power management) enabled.
5. Temperature measured by SMART attribute
194.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
M500IT 2.5-Inch NAND Flash MLC SSD
Features
09005aef864ead5e
m500it_2_5_MLC_industrial_ssd.pdf - Rev. G 6/16 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
